Apple PowerBook G3 Series (Backup Battery) - Manual (Page 3)

Installing the Replacement Backup battery
1. Insert the backup battery in its holder and connect it to the logic board.
2. Flip the keyboard over and insert the small tabs at the bottom of the keyboard into the openings in the PowerBook case.
3. Pull down on the keyboard release tabs (located to the left of the F1 and F9 keys) and then press down on the top portion
of the keyboard.
4. Let go of the keyboard release tabs to secure the keyboard in place.
5. Replace the expansion bay modules and connect the power adapter, if needed.
Warning : Never turn on your computer unless all of its internal and external parts are in place and it is
closed. Operating the computer when it is open or missing parts can damage your computer or cause injury.
6. Restart the computer.

Apple Computer, Inc.
© 2000 Apple Computer, Inc. All rights reserved.
Under the copyright laws, this document may not be copied, in whole or in part, without the written consent of Apple.
The Apple logo is a trademark of Apple Computer, Inc., registered in the U.S. and other countries. Use of the “keyboard” Apple logo (Option-Shift-K) for commercial pur-
poses without the prior written consent of Apple may constitute trademark infringement and unfair competition in violation of federal and state laws.
Every effort has been made to ensure that the information in this document is accurate. Apple is not responsible for printing or clerical errors.
Apple Computer, Inc.
1 Infinite Loop
Cupertino, CA 95014-2084
408-996-1010
http://www.apple.com
Apple, the Apple logo and PowerBook are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.
3 PowerBook G3 series Bronze Keyboard - Backup Battery