Audiovox Commander MT XMRVRFM002 - Manual (Page 11)

11
Getting Started
You can begin to enjoy XM® Satellite Radio as soon as the CommanderMT
System installation is complete, and the XM® Satellite Radio service has been
activated as follows:
1. Set up your Audiovox CommanderMT System using the installation
instructions included in your CommanderMT installation guide,
or with the help of a professional installer.
NOTE: The antenna must be installed on the outside of your
vehicle or home/office for best performance.
2. Press the Power button ( ) on the CommanderMT or the Power
button on the Remote Control to turn on the XM Mini-Tuner.
3. The XM® logo appears and slowly fades on the display for 2 sec-
onds, followed by appearance of the Audiovox logo ( ) for 10
seconds. Next, tune to the XM® preview channel (#1). If you can hear
the XM® Preview, your equipment is ready for activation. (See
Figure 2.)
Figure 2. XM® Preview Channel (#1) Display
Getting Started
Celebrate The Human Voic
XM Preview
XM 112
A-2 5:03
CH 1