Audiovox Commander MT XMRVRFM002 - Manual (Page 13)

13
Online Activation Process - Once the ID code is obtained, log on to XM®
at http://activate.xmradio.com and follow the easy instructions to activate
your CommanderMT XM® unit.
Call-in Activation Process -
Call XM® at 1-800-XM RADIO
(1-800-967-2346). One of XM®’s friendly Customer Care representatives will
take the necessary information and walk you through the activation pro-
cess. After activation is completed, you should keep your receiver ON until
the XM signal has been received and you have access to the full channel
lineup. Activation normally takes 10 - 15 minutes, but during busy periods
you may need to keep your radio on for up to 1 hour. This will complete the
activation process.
CommanderMT Display Controller Features
The Audiovox CommanderMT Display Controller provides 8 control but-
tons, five of which are integrated with the scroll wheel, plus number buttons
0 through 9. (See Figure 5.)
Power On/Off:
When the Power( ) button on the Commander or Remote Control
is pressed momentarily, power is applied to the XM® Mini-Tuner.
The XM® logo appears and slowly fades on the display for 2 sec-
onds, followed by appearance of the Audiovox logo (
) for 10-
seconds. Power up is followed by the Preview screen or by the tuning
mode in effect when the unit was last powered off. (See Figure 6.)
Power is turned off when the Power button is momentarily pressed;
the XM® logo appears and slowly fades on the display for 2 sec-
onds, after which the unit enters the power off state.
Getting Started/Commander
MT
Display Controller Features