Audiovox Commander MT XMRVRFM002 - Manual (Page 31)

31
Figure 28. Tune Select Menu Display
Select by Song: To activate the select by song alert feature, rotate
the scroll wheel CW or press the channel up button on the remote
control to highlight Select by Song; then press the Select button;
the Select by song confirmation screen appears as shown in
Figure 29. Select by Song Confirmation Display
after which any new information saved will replace the oldest entry
in memory. To store a song or artist, press and hold the Select
Button until the unit emits a confirmation tone. When the exact Artist
or Song is detected on another XM channel, the user will be notified
via a confirmation tone. An alert will also appear on the screen for
approximately 8 seconds identifying that a match was found.
Pressing the Select Button while this screen is active forces the unit
to jump to the channel currently playing before desired Artist or song.
Menu Options/T
une Select Mode
Erase All
Erase Some
Select by Song
ROTATE DIAL TO CHANGE
Select by Song Set
TUNE SELECT MODE