Audiovox Commander MT XMRVRFM002 - Manual (Page 12)

12
4. Next, make sure you have a credit card or XM Pre-Paid Service Card,
and your XM® Radio ID handy.
Figure 3. Channel “0” Radio ID Display
5. To obtain the XM® identification (ID) number, tune to channel 0
and press the Select button. The 8-digit XM® ID number will
appear as shown in Figure 3.
Please record your 8-character alphanumeric XM® ID code care-
fully. There is no “I” (eye), “o” (oh), “S” or “F” used. You may wish to
double-check your ID code located on the rear of your receiver.
Enter the ID code as shown in Figure 4 below:
Figure 4. Receiver 8-Character Alphanumeric ID
NOTE: No adjustments are allowed in this mode. To exit the Radio ID screen,
tune to any channel using the Channel Scroll Wheel, or the Up (
∧∧∧∧∧
) or
Down (
∨∨∨∨∨
) buttons on the remote control, and press the Select
button.
ZHDQH088
Radio ID 0
Getting Started