Audiovox Commander MT XMRVRFM002 - Manual (Page 24)

24
Audio Level
This feature allows the user to adjust the level of the audio output
signal when the FM frequency modulator is on or off. This menu
option is entered when the menu button is pressed and the scroll
wheel is rotated CW, or the channel up button is pressed on the
remote control, to highlight Audio Level on the display. Press the
Select button to display the options.
FM On: Upon entering the Audio Level option, if the FM frequency
modulator is enabled, a horizontal bar graph is displayed with a
+ sign on the right and a - sign on the left, and indicates audio
level in 6 steps. Rotate the scroll wheel CW or press the channel
up button on the remote control to increase the audio level one
step; rotate the scroll wheel CCW or press the channel down
button to decrease the audio level one step. (See Figure 15.)
Additional text below the graph indicates the FM modulator is
turned on and the audio level applies to FM audio only. When the
desired level is set, press the Select button; the FM audio level
set display appears as shown in Figure 16.
Menu Options/FM Audio Level
Figure 15. Set FM Audio Screen
ROTATE DIAL TO SELECT
FM modulator is turned on
(levels for FM use only)
+ FM Audio -