Sony MPK-DVF5M - Manual (Page 12)

12
-GB
4
Attach the supplied battery pack
NP-FM30 for the LCD monitor to
the rear shell. Be sure to charge
the battery pack fully before
attaching.
Note
Firmly insert the supplied battery cushion as shown
to prevent the battery pack from coming loose if it
is dropped or otherwise subjected to impact.
About the supplied battery pack NP-FM30
What is an “InfoLITHIUM” battery pack?
The “InfoLITHIUM” is a lithium ion battery pack which can exchange data with
compatible electronic equipment about its battery consumption. Sony recommends that
you use the “InfoLITHIUM” battery pack with electronic equipment having the
mark.
* The indication may not be accurate depending on the conditions and environment
in which the equipment is used.
“InfoLITHIUM” is a trademark of Sony Corporation.
• To charge the supplied NP-FM30 battery pack, prepare AC adapter/charger that can
charge “InfoLITHIUM” M series (optional).
• You can use also the “InfoLITHIUM” M series NP-FM50 (optional).
• The recording time of a fully charged NP-FM30 battery pack is approximately 5
hours (continuous recording). The actual recording time may be less, depending on
conditions of use.
The “InfoLITHIUM” battery pack is recyclable. When the battery is
exhausted and can no longer be recharged, cover the metal parts of the
battery with an isolator such as scotch tape and take it to a battery
recycling shop.
About the LCD monitor
• Install the camcorder to the marine pack and set the POWER switch to ON to make
images appear on the LCD screen.
• The remaining battery time indicator displayed on the LCD monitor refers to
remaining time of the camcorder battery time, not the remaining time of the LCD
monitor battery.
• The LCD monitor of the marine pack does not correspond with the “InfoLITHIUM”
battery pack.
Preparation (continued)