Connecting the fm wire antenna (aerial), Connecting the fm wire antenna, Aerial) – Sony TAV-L1 User Manual

Page 16: Secure the wall anchor bracket to a wall or pillar

Advertising
background image

16

GB

2

Secure the wall anchor bracket to a wall
or pillar.

3

Thread the rope or chain through both
holes of the screws, and then tighten the
other end of the rope or chain to the wall
anchor bracket.

4: Connecting the FM
wire antenna (aerial)

Connect the supplied FM wire antenna (aerial) for
listening to the FM radio. Thread the wire antenna
(aerial) through the slit of the cover, and then replace
the cover.

Notes

• Be sure to fully extend the FM wire antenna (aerial).
• After connecting the FM wire antenna (aerial), keep it as

horizontal as possible.

Tip

If you have poor FM reception, use an “L” type 75-ohms
coaxial cable (not supplied) to connect the system to an
outdoor FM antenna (aerial) as shown below. If you use a
75-ohms coaxial cable other than “L” type, you may not be
able to replace the covers properly.

A commercially available
strong rope or chain

A commercially
available wall
screw

DVD
DIGITAL OUT

FM ANTENNA

OPTICAL

FM 75

COAXIAL

FM wire antenna (aerial)

DVD
DIGITAL OUT

FM ANTENNA

OPTICAL

FM 75

COAXIAL

Outdoor FM antenna
(aerial)

“L” type 75-ohms coaxial
cable (not supplied)

Advertising