Sony TAV-L1 - Manual (Page 45)

Usi
ng t
he TV
M
e
nu
45 GB
Assigns a channel name of your choice up to five
letters or numbers. The name will be displayed briefly
on the screen when the channel is selected. (Names for
channels are usually taken automatically from Text (if
available).)
1
Press (OK) to select [Programme
Labels].
2
Press M/m to select the channel you
want to name, then press (OK).
3
Press </M/m/, to select the desired
letter or number ([s] for a blank space),
then press
(OK).
If you input a wrong character
Press
</M/m/, to select %/5 and press
(OK) repeatedly until the wrong character is
selected. Then, press
</M/m/, to select the
correct character and press (OK).
4
Repeat the procedure in step 3 until the
name is complete.
5
Press </M/m/, to select [End], then
press (OK).
Repeat the procedure in steps 2 and 3 to move other
channels if required.
Do the following options.
1
Press (OK) to select [AV Preset].
2
Press M/m to select the desired input
source, then press (OK).
3
Press M/m to select the desired option
below, then press (OK).
Programme Labels
(Analogue mode only) AV Preset
Option Description
Label You can conveniently assign a
name to any equipment
connected to the side and rear
sockets. The name will be
displayed briefly on the screen
when the equipment is
selected.
Press M/m to select one of
the following, then press
(OK).
[AV1] (or [AV2]/[AV4])/
[VIDEO]/ [DVD]/[CABLE]/
[GAME]/[CAM]/[SAT]: Uses
one of these preset labels.
[Edit]: Creates your own label.
Follow steps 3 through 5 of
Programme Labels (page 45).
[Skip]:
Skips an input source that is
not connected to any
equipment when you press
M/m to select the input source.
After selecting this option,
press
(OK).
Sound Offset Sets an independent volume
level to each equipment
connected to the system. This
setting is effective except for
the DVD function.
Press
, to select [Sound
Offset], then press (OK).
Press M/m to select the desired
volume level.
Continued