Sony CDP-CX250 - Manual (Page 15)

Playing CDs Getting Started Playing CDs
15 EN
The programs remain even after Program Play ends
When you press ·, you can play the same program
again.
When you press PROGRAM during Continuous or
Shuffle Play
The program will be played after the current track.
The programs remain until you erase them
If you replace discs, the programmed disc and track
numbers remain. So, the player plays only the existing
disc and track numbers. However, the disc and track
numbers that are not found in the player or on the disc
are deleted from the program, and the rest of the
program is played in the programmed order.
Creating a program using the remote Z
3
Press the number button of the disc.
TRACK/SPACE
DISC/CAPS
CHECK
·
PROGRAM
Number
buttons
ENTER
CLEAR
1
Press PROGRAM until the program number you
want (PROGRAM 1, 2 or 3) appears in the display.
2
Press DISC/CAPS.
4
To program a whole disc, skip this step and go to
Step 6. Press TRACK/SPACE.
5 Press the number button of the track.
7
To program other discs/tracks, do the following:
To program
Other discs
Other tracks on the same disc
Other tracks on other discs
8 Press · to start Program Play.
To cancel Program Play
Press CONTINUE.
Repeat Steps
2, 3 and 6
4 to 6
2 to 6
6
Press ENTER.
The disc being programmed
The track being
programmed Playing order
PROGRAM1
CD1
DISC-[ 2O]
2O
PROGRAM1
CD1
TRACK-[ _]
2O
PROGRAM1
CD1
TRACK-[ 3]
2O
PROGRAM1
CD1
DISC TRACK STEP
2O 3 1
2O
PROGRAM1
CD1
DISC-[ _]
20