Sony MHC-W55 - Manual (Page 19)

Chapter 4: the Tape Player
GB
19
Recording and playback start from the
front side of the tape, unless you change
the playing direction before recording.
Make sure the tabs on the cassette have
not been removed.
2
Choose how you want the tape to record
and press DIRECTION MODE
repeatedly until the desired mode
appears.
Indication Operation
A Dubbing stops at the end of
one side.
ß When the tape in one deck
comes to the end of the front
side, it reverses immediately
regardless of the tape
position in the other deck.
RELAY When the tape in one deck
reaches its end of the front
side, it stops until the other
tape come to its end, and
then both tapes reverse
together.
3
Press HIGH SPEED DUBBING.
Deck B stands by for recording.
4
Press P PAUSE.
The tape starts dubbing.
If you set DIRECTION MODE to
ß or
RELAY, recording always stops at the
end of the reverse side.
To stop dubbing
Press p .
You do not have to press DOLBY NR with
high speed dubbing
The tape in deck B is automatically
recorded in the same state as the tape in
deck A.
Dubbing Another Tape
Manually
When you want to dub only part of the
tape, dub manually at normal speed. Use
TYPE I (normal) or TYPE II (CrO
2 ) tape for
recording.
1
Press § EJECT and insert a recorded
tape in deck A with the side you want to
play facing forward.
Also, insert a blank tape in deck B with
the side you want to record on facing
forward.
Recording and playback start from the
front side of the tape, unless you change
the playing direction before recording.
Make sure the tabs on the cassette have
not been removed.
2
Press FUNCTION repeatedly until
“TAPE” appears in the display.
3
Select dual or single-sided recording.
* Recording always stops at the end of the
reverse side. Be sure to start from the
front side.
4
Press r REC.
Deck B stands by for recording.
5
Press P PAUSE to release recording
pause.
Recording starts.
6
Press · or ª on deck A to start
playback.
To stop recording
Press
p on deck A and B.
Notes
•When dubbing tapes originally recorded
with Dolby NR B, the dubbed tape is
automatically recorded with Dolby NR B.
•When you want to record a tape recorded
without Dolby NR B onto another tape
using Dolby NR B, press DOLBY NR so
that “DOLBY NR B” appears in the
display before recording.
To record
One side of the tape
Both sides*
Press DIRECTION
MODE to select
A
ß or RELAY
SYSTEM
POWER
m ON
2
»
r P
p
0 )
Ж
» Ж
p
0 )
P »
⁄
⁄
⁄
p
p
5 1
DOLBY NR
3 4 1
6
p