Sony SPK-HCD User Manual

Sports pack caisson sport, Spk-hcd, Precautions on use

Advertising
background image

Operating Instructions
Mode d’emploi
Manual de instrucciones

3-295-110-11(1)

SPK-HCD

© 2008 Sony Corporation Printed in Japan

Sports Pack

Caisson Sport

Owner’s Record

The model and serial numbers are located inside of the unit. Record the serial number

in the space provided below. Refer to them whenever you call upon your Sony dealer

regarding this product.
Model No. SPK-HCD Serial No.

Retractable

mirror

Miroir

rétractable

Espejo

retráctil

Hook for shoulder strap

Crochet de bandouliére

Gancho para la correa

para el hombro

Camera mounting shoe

Sabot de montage du

caméscope

Zapata de montaje de la

videocámara

POWER switch*

2

Commutateur POWER*

2

Selector POWER*

2

Grip strap

Sangle

Correa de la

empuñadura

Tripod mounting hole

Filetage de trépied

Orificio de montaje en

trípode

PHOTO button

Touche PHOTO

Botón PHOTO

Front body

Partie avant

Parte frontal del

cuerpo

Front glass

Vitre avant

Vidrio frontal

Stereo microphone

Microphone stéréo

Micrófono estéreo

O-ring

Joint torique

Junta tórica

1

English

Disposal of Old Electrical & Electronic Equipment (Applicable in the European

Union and other European countries with separate collection systems)

This symbol on the product or on its packaging indicates that this product shall

not be treated as household waste. Instead it shall be handed over to the applicable

collection point for the recycling of electrical and electronic equipment. By ensuring

this product is disposed of correctly, you will help prevent potential negative

consequences for the environment and human health, which could otherwise be

caused by inappropriate waste handling of this product. The recycling of materials

will help to conserve natural resources. For more detailed information about recycling

of this product, please contact your local Civic Office, your household waste disposal

service or the shop where you purchased the product.

< Notice for the customer in the countries applying EU Directives >

The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075

Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH,

Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please

refer to the addresses given in separate service or guarantee documents.
NOTICE FOR THE CUSTOMERS IN THE U.S.A

CAUTION

You are cautioned that any changes or modifications not expressly approved in this manual could void

your authority to operate this equipment.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

Consult the dealer or an experienced radio/TV technician for help.

This Sports Pack SPK-HCD is exclusively for use with the Sony digital video camera

recorder HDR-SR12/SR11/SR10/SR8/SR7/SR5, HDR-CX7/CX6, HDR-UX20/UX19/

UX10/UX9/UX7/UX5/UX3, HDR-HC9/HC7/HC5/HC3, DCR-SR300/SR290/SR220/

SR210/SR200/SR190/SR85/SR82/SR75/SR72/SR65/SR62/SR55/SR52/SR46/SR45/

SR42/SR36/SR35/SR33/SR32, DCR-DVD910/DVD908/DVD810/DVD808/DVD803/

DVD710/DVD708/DVD703/DVD653/DVD610/DVD608/DVD602/DVD510/

DVD508/DVD506/DVD410/DVD408/DVD406/DVD403/DVD310/DVD308/

DVD306/DVD203/DVD202/DVD115/DVD110/DVD109/DVD108/DVD106/

DVD103/DVD92, DCR-HC96/HC94/HC62/HC54/HC53/HC52/HC51/HC48/

HC47/HC46/HC45/HC44/HC38/HC37/HC36/HC35/HC28/HC27/HC26/HC24/

HC23.

* The above video camera models may not be available in all countries/regions.

The sports pack SPK-HCD is water- and moisture- resistant, making it possible to use

the Sony digital video camera recorder (referred to below as “video camera”).

Usable at the depth as low as 5 meters (17 feet) under water.

For using your video camera with this sports pack, refer to the operating

instructions of the video camera.

Before you start recording, make sure that the video camera is working correctly

and there is no water leakage.

Sony does not accept liability for damage to the video camera, battery, etc., when

using the sports pack or for the cost of recording if water leakage occurs as a

result of incorrect use.

Precautions on use

Do not subject the front glass to strong shock, as it may crack.

Avoid opening the sports pack in the sea or at the beach. Preparation such as

installing and changing the cassette tape, “Memory Stick Duo” and disc should be

done in a place with low humidity and no salty air.

Do not throw the sports pack into the water.

Avoid using the sports pack in places with storong waves.

Avoid using the sports pack under the following situations:

in a very hot or humid place.

in water hotter than 40 ˚C (104 ˚F).

at temperatures lower than 0 ˚C (32 ˚F).

In these situations moisture condensation or water leakage may occur and damage

the equipment.

Avoid installing the video camera in a humid place. Installing in a humid place will

lead to condensation.

Use the sports pack for no longer than one hour at a time in temperatures above 35

˚C (95 ˚F).

Do not leave the sports pack under direct sunlight for a long period of time. If you

cannot avoid leaving the sports pack under direct sunlight, be sure to cover the pack

with a towel or other protection.

If sun oil is on the sports pack, be sure to wash it off thoroughly using lukewarm

water. If the sports pack is left with sun oil on its body, the surface of the sports pack

may become discolored or damaged. (such as cracks on the surface)

Water Leakage

If water happens to leak in, stop exposing the sports pack to water immediately.

If the video camera gets wet, take it to the nearest Sony service facility immediately.

Repair costs must be borne by the customer.

Handling the O-ring

What is the O-ring?

The O-ring ensures the waterproof qualities of the sports pack or other equipment. (See

illustration )

O-ring maintenance is very important. Failure to carry out O-ring

maintenance according to the instructions may lead to water leakage and

cause the sports pack to sink.

Handling the O-ring

Fit the O-ring

Avoid fitting the O-ring in dusty or sandy locations.

1 Remove the O-ring. (See illustration

)

To remove the O-ring, press it and slide it in the direction of the arrow as

illustrated. The O-ring has enough slack to be able to be removed easily.

Be careful not to scratch the O-ring with your fingernail.

Do not use a pointed or metal object to remove the O-ring. This kind of object

may scratch or damage the sports pack groove or O-ring.

2 Inspect the O-ring.

Check carefully for the following. If found, wipe off them with a soft cloth or tissue

paper.

Is there any dirt, sand, hair, dust, salt, thread scraps, etc. on the O-ring?

Is there any old grease on the O-ring?

Dirt

Sand

Hair

Dust

Salt

Thread

scraps

Lightly run your fingertip around the O-ring to check for any invisible dirt.

Be careful not to leave any cloth or tissue paper fibers on the O-ring after wiping it.

Check the O-ring for cracks, skewing, distortion, fine splitting, scratches, sand

inclusion, etc. Replace the O-ring if it is cracked or scratched.

Cracks

Skewing Distortion

Fine

Splitting

Scratches Sand

inclusion

3 Inspect the O-ring groove.

Grains of sand or hardened salt sometimes get into the groove. Carefully remove

them by blowing with an air spray or by wiping them with a cotton wool bud. Be

careful not to leave any fibers from the cotton wool bud inside.

4 Inspect the contact surface on the other side of the O-ring in the same way.

5 Apply a coating of grease to the O-ring.

Use your fingertips to thinly coat the entire surface of the O-ring with a small

drop of grease

. (See illustration )

Do not use paper or cloth as fibers may stick to the O-ring.

Make sure there is always a thin coating of grease on the surface of the O-ring.

Grease protects the O-ring and prevents wear.

Fit the O-ring immediately after coating it with grease. Do not leave the greased

O-ring on a table or other surface.

6 Fit the O-ring into the groove of the sports pack.

Fit the O-ring evenly into the groove paying attention to the following points:


Check for dirt on the O-ring.

Check the O-ring is not twisted. (See illustration )

How to check for water leakage

After replacing the O-ring, close the sports pack without inserting the equipment you

are going to use. Immerse the sports pack in water to a depth of about 15 cm for about

three minutes and check that no water leaks in.

Maintenance

If the sports pack is allowed to dry with sea water still in the O-ring groove, salt crystals

form which may impair the O-ring’s functions.

O-ring serviceable life

The serviceable life of the O-ring varies with frequency of use of the sports pack and

conditions. Generally, it is about one year.

Even if the O-ring is not cracked or scratched, deformation or wear reduces its

waterproof qualities. Replace the O-ring with a new one if you find cracks, skewing,

distortion, fine splitting, scratches, sand inclusion, etc.

After replacing, check that no water leaks in.

Grease

Use the grease supplied. Using other manufacturer’s grease will damage the O-ring, and

cause water leaks.

Anti-fogging lens solution

Coat the surface of the front glass with the supplied anti-fogging lens solution. This is

effective in anti-fogging.

How to use the anti-fogging lens solution

Apply 2 or 3 drops of the liquid to the front glass and wipe evenly to spread the liquid

out by using the swabs, a soft cloth or tissue paper.

Desiccant

To increase the anti-fogging effect in addition to using the anti-fogging lens solution,

use the desiccant supplied. Insert new one desiccant into the sports pack 1 to 2 hours

before recording. Put the desiccant in the camera mounting shoe rail space inside the

front body. (See illustration ) Be careful not to catch the desiccant with the camera

mounting shoe. Keep the remaining desiccant in its original bag, and keep the bag

firmly closed. Do not return the desiccant to the bag after use, or you will reduce the

effect of the unused desiccant. Use a new desiccant to increase the anti-fogging effect.

Do not leave the desiccant in the sports pack.

O-ring, grease and anti-fogging lens solution

You can obtain the O-ring, grease and anti-fogging lens solution at the nearest Sony

dealer.

O-ring (model No. 3-098-143-01)

Grease (model No. 2-582-620-01)

Anti-fogging lens solution (model No. 3-072-039-01)

Maintenance

After recording in a location with a sea breeze, wash the sports pack thoroughly in

fresh water with the buckles fastened to remove salt and sand, then wipe with a soft

dry cloth. It is recommended that you submerge the sports pack in fresh water for

about 30 minutes. If it is left with salt on it, metal portions may be damaged or rust

may form and cause water leakage. Be careful not to hit the sports pack with other

equipment when submerging the sports pack in fresh water. When the water pressure

is low and the bend of the O-ring is small, an excessive impact may cause water

leakage.

If sun oil is on the sports pack, be sure to wash it off thoroughly using lukewarm

water.

Clean the inside of the sports pack with a soft dry cloth. Do not wash the inside of the

sports pack.

Be sure to perform the above maintenance each time you use the sports pack. Do not

use any type of solvent such as alcohol, benzine or thinner for cleaning, as this might

damage the surface finish of the sports pack.

When storing the sports pack

Attach the spacer supplied with your sports pack to prevent wear of the O-ring. (See

illustration )

Close the sports pack without fastening the buckles to prevent wear of the O-ring.

Prevent dust from collecting on the O-ring.

Avoid storing the sports pack in a cold, very hot or humid place, or together with

naphthalene or camphor, as these conditions might damage the unit.

Troubleshooting

Symptom

Cause

Corrective Actions

The sound is not

recorded.

The Audio/Remote plug is

not connected.

Connect the Audio/Remote plug to

the A/V jack, A/V OUT jack or A/V

remote jack on the video camera.

Water leaks into

the sports pack.

The buckles are not

fastened.

The O-ring is not set

correctly.

There are scratches or

cracks on the O-ring.

Fasten the buckles until they click.

Put the O-ring in the groove evenly.

Replace the O-ring with a new one.

The recording

and playing back

function does not

work.

The battery pack is run out.

The remote plug is not

connected.

The tape has run out.

The “Memory Stick Duo” is

full.

The safety tab on the

cassette and the “Memory

Stick Duo” is set to

unrecordable position (when

your media has the safety

button).

The disc has run out of

space.

The disc has been finalized.

The hard disk is full.

Charge the battery pack fully.

Connect the Audio/Remote plug

to the A/V jack, A/V OUT jack

or A/V remote jack on the video

camera.

Rewind the tape or use a new one.

Insert another “Memory Stick Duo”

or erase unneeded data from the

“Memory Stick Duo.”

Slide the safety tab or install a new

cassette tape and a new “Memory

Stick Duo.”

Use a new disc or format the disc

(except DVD-R, DVD+R DL).

Unfinalize the disc (except DVD-R,

DVD+R DL).

Erase unneeded data from the hard

disk drive.

The power does

not turn on.

Soon after being turned off,

the power does not turn on.

Allow the sports pack to sit for

at least 2 seconds after the LCD

screen of the video camera goes out

and turn the sports pack on again.

There seems to be

water in the sports

pack.

The sports pack is designed

so that water can flow

into and out of the space

illustrated. (See illustration

)

This space is sealed from the inside.

Drops of water in this space do not

indicate a malfunction.

The button of the

sports pack does

not depress easily,

seems to be caught

on something, or

does not return

quickly.

There is an O-ring inside of

the sports pack’s button.

When using the sports pack after

it has been in disuse for extended

period, this will sometimes occur.

This is not a malfunction.

Specifications

Material

Plastic (PC, ABS), glass

Waterproof

O-ring, buckles

Built-in microphone

Stereo

Dimension

Approx. 159 Ч 148 Ч 220 mm (w / h / d) (6 3/8 Ч 5 7/8 Ч 8 3/4 inches)

Mass

Approx. 960 g (2 lb 2 oz) (only sports pack)

Included items

Sports pack (1)

Shoulder strap (1)

Camera mounting shoe (B (1)/D (1)/E (1)/F (1)/G (1)/H (1)/I (1))

Tripod screw plate (1)

Reflex prevention ring (Ø 25 (1)/M30 Ч Ш 43 (1)/M30 Ч Ш 50 (1)/M30 Ч Ш 58 (1)/

M30 Ч Ш 62 (1)/M37 Ч Ш 55 (1))

Grease (1)

Spacer (1)

Anti-fogging lens solution (1)

Desiccant (1)

Set of printed documentation

Design and specifications are subject to change without notice.

Using the sports pack

The video camera can be operated with the buttons of the sports pack.

Preparation

1 Install the video camera into the sports pack.

Refer to “Sports Pack Preparation Guide” to install the video camera.

2 Turn on the sports pack.

Press the POWER button of the sports pack to turn on the video camera and sports

pack. The video camera is set to the movie recording mode.

Notes

If the video camera is left in Standby mode for five minutes or more, it switches off

automatically. This is to preserve the battery.

You can change the “A.SHUT OFF” setting of this function to [Never] using the

video camera. For details, refer to the operating instructions of your video camera.

To return to Standby mode, turn the POWER button to “ON” again.

3 Set the mode of the video camera.

Press the MODE button of the sports pack to switch the mode of the video camera in

the following order.

Movie recording

mode

Still image

recording mode

Video playback

mode

Press the MODE button of the sports pack to switch the mode until the desired

mode is displayed by checking the LCD screen of the video camera in the retractable

mirror.

For details about each mode of the video camera, refer to the operating instructions

of the using video camera.

Some models enable you to record movies in the still image recording mode or record

still images in the movie recording mode.

For details, refer to the operating instructions supplied with your video camera.

Notes

When pressing the MODE button, the mode of the video camera without photo button

switches in the following order.

Movie recording

mode

Movie recording

mode

Video playback

mode

Open the retractable mirror

You can record while watching the reflection in the retractable mirror.

1 Open the retractable mirror by holding the “OPEN” part.

2 Open the wings and insert the projections into their holes.

To close the retractable mirror

Release the projections on both wings, and close the lower wing first.

Recording

Recording movies

Movies are recorded onto a tape, disc, hard disk or “Memory Stick Duo.”

1 Press the MODE button of the sports pack to set the video camera’s mode to

the mode that can record movies.

2 Press the START/STOP button.

Recording starts.

To stop recording

Press the START/STOP button.

If you press the START/STOP button once more, recording will start again.

To turn off the power

Stop recording before turning the POWER button to “OFF.”

Zooming (See illustration

)

Press the wide button to zoom out.

Press the telephoto button to zoom in.

Press gently to zoom more slowly.

Recording still images

Still images are recorded onto a “Memory Stick Duo,” disc or hard disk.

1 Press the MODE button of the sports pack to set the video camera’s mode to

the mode that can record still images.

2 Lightly press the PHOTO button.

The green mark at the top of the LCD screen stops flashing and remains on. You can

now record a still image.

* No image is recorded yet.

3 Firmly press the PHOTO button.

The image shown on the screen is recorded.

Some models have a Dual Rec function. For details, refer to the operating

instructions of the video camera.

Notes

1 You cannot use Nightshot or other function for shooting in the dark with the sports

pack.

2 You cannot use a video camera’s flash or tele-macro functions with the sports pack.

3 Some models let you select the recording media (“Memory Stick Duo,” disc or hard

disk). For details, refer to the operating instructions of the video camera.

4 There are several kinds of “Memory Stick Duo.” They vary according to the type of

video camera. For details, refer to the operating instructions of the video camera.

5 Some models of the video camera enable you to record to a “Memory Stick Micro.”

When using “Memory Stick Micro” with the video camera, be sure to refer to notes

on use in the operating instructions of the video camera.

Playing back

You can play back the image by pointing the remote commander toward the remote

sensor (located on the front center of the sports pack). You cannot hear sound.

Use the remote commander for all other functions. For details, refer to the operating

instructions supplied with your video camera.

Notes

If “Remote Commander” in the menu of your video camera is set to “OFF,” change it to

“ON.”

You cannot use this function with a video camera that does not have a remote

commander supplied.

Removing the video camera

1 Press the POWER button to turn off the video camera. (See illustration

-1)

2 Release the buckles, and open the rear body.

For details, refer to step 1 of “Installing the Video Camera” in the Sports Pack

Preparation Guide.

Notes

Before opening the sports pack, wipe moisture off the sports pack and yourself. Do

not allow water on the video camera.

3 Pull out the camera mounting shoe. (See illustration

-3)

Holding the camera mounting shoe by the knobs on one side of it, press the knobs

and extract the video camera slowly.

4 Remove the video camera until the plugs connected to it are just out of the

sports pack, and then disconnect the plugs from the video camera.

Notes

Make sure you disconnect the Audio/Remote plug properly by holding the plug part.

Do not disconnect the plug by holding the cord part, or pull the camera mounting

shoe out while the plug is connected. Doing so may damage the plug or video

camera’s jack.

5 Detach the camera mounting shoe.

Français

Traitement des appareils électriques et électroniques en fin de vie (Applicable

dans les pays de l’Union Européenne et aux autres pays européens disposant

de systèmes de collecte sélective)

Ce symbole, apposé sur le produit ou sur son emballage, indique que ce produit ne

doit pas être traité avec les déchets ménagers. Il doit être remis à un point de collecte

approprié pour le recyclage des équipements électriques et électroniques. En

s’assurant que ce produit est bien mis au rebut de manière appropriée, vous aiderez

à prévenir les conséquences négatives potentielles pour l’environnement et la santé

humaine. Le recyclage des matériaux aidera à préserver les ressources naturelles. Pour

toute information supplémentaire au sujet du recyclage de ce produit, vous pouvez

contacter votre municipalité, votre déchetterie ou le magasin où vous avez acheté le

produit.

< Avis aux consommateurs des pays appliquant les Directives UE >

Le fabricant de ce produit est Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japon.

Le représentant agréé pour la compatibilité électromagnétique et la sécurité du produit est Sony

Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Allemagne. Pour toute question

relative à la garantie ou aux réparations, reportez-vous à ľadresse que vous trouverez dans les

documents ci-joints, relatifs à la garantie et aux réparations.

Le caisson SPK-HCD est exclusivement destiné aux modèles de caméscope

numérique de Sony suivants : HDR-SR12/SR11/SR10/SR8/SR7/SR5, HDR-CX7/CX6,

HDR-UX20/UX19/UX10/UX9/UX7/UX5/UX3, HDR-HC9/HC7/HC5/HC3, DCR-

SR300/SR290/SR220/SR210/SR200/SR190/SR85/SR82/SR75/SR72/SR65/SR62/SR55/

SR52/SR46/SR45/SR42/SR36/SR35/SR33/SR32, DCR-DVD910/DVD908/DVD810/

DVD808/DVD803/DVD710/DVD708/DVD703/DVD653/DVD610/DVD608/

DVD602/DVD510/DVD508/DVD506/DVD410/DVD408/DVD406/DVD403/

DVD310/DVD308/DVD306/DVD203/DVD202/DVD115/DVD110/DVD109/

DVD108/DVD106/DVD103/DVD92, DCR-HC96/HC94/HC62/HC54/HC53/HC52/

HC51/HC48/HC47/HC46/HC45/HC44/HC38/HC37/HC36/HC35/HC28/HC27/

HC26/HC24/HC23.

* Il est possible que tous les modèles de caméscopes décrits ci-dessus ne soient pas

disponibles dans tous les pays/régions.

Le caisson SPK-HCD est résistant à l’eau et à l’humidité, ce qui permet d’utiliser le

caméscope numérique Sony dans ce type d’environnement (désigné par

« caméscope » dans la suite du document).

Vous pouvez l’utiliser sous l’eau jusqu’à 5 mètres (17 pieds) de profondeur.

Pour utiliser votre caméscope avec ce caisson, reportez-vous au mode d’emploi du

caméscope.

Avant de commencer un enregistrement, assurez-vous que le caméscope

fonctionne correctement et qu’il n’y a pas d’infiltration d’eau.

Sony décline toute responsabilité pour tout dommage provoqué au caméscope, à

la batterie, etc., lors de l’utilisation du caisson ou pour la perte d’un enregistrement

en cas d’infiltration d’eau du fait d’une utilisation incorrecte du produit.

Précautions d’emploi

Ne soumettez pas la vitre avant à des chocs importants, car elle pourrait se fissurer.

Evitez d’ouvrir le caisson dans la mer ou sur la plage. Les opérations préparatoires,

telles que la mise en place et le remplacement d’une cassette, du « Memory Stick

Duo » et du disque, doivent être effectuées à l’abri de l’humidité et de l’air salin.

Ne jetez pas le caisson dans l’eau.

N’utilisez pas le caisson en cas de fortes vagues.

N’utilisez pas le caisson dans les conditions suivantes :

dans un endroit très chaud ou humide ;

dans une eau à plus de 40 °C (104 °F) ;

sous des températures inférieures à 0 °C (32 °F).

Dans de telles conditions, le matériel pourrait être endommagé par une condensation

ou une infiltration d’eau.

Evitez d’installer le caméscope dans un endroit humide. De la condensation risquerait

de se former à l’intérieur.

N’utilisez pas le caisson plus d’une heure lorsque la température est supérieure à 35

°C (95 °F).

Evitez d’exposer le caisson à la lumière directe du soleil pendant une période

prolongée. Si ce n’est pas possible, veillez à le couvrir d’une serviette ou d’une autre

protection.

Si de la crème solaire est tombée sur le caisson, prenez soin de l’éliminer

convenablement avec de l’eau tiède. A défaut, la surface du caisson risque d’être

décolorée ou endommagée (craquelures).

Infiltration d’eau

Si de l’eau s’infiltre dans le caisson, arrêtez immédiatement de l’exposer à l’eau.

Si le caméscope est mouillé, portez-le immédiatement chez le revendeur Sony le plus

proche.

Les frais de réparation seront à la charge de l’utilisateur.

Entretien du joint torique

Qu’est-ce que le joint torique ?

Le joint torique garantit l’étanchéité du caisson ou de tout autre équipement. (Voir

illustration )

L’entretien du joint torique est très important. Le non-respect des

instructions d’entretien du joint torique peut provoquer des infiltrations

d’eau et faire couler le caisson.

Entretien du joint torique

Fit the O-ring

Evitez de fixer le joint torique si vous vous trouvez dans un lieu sablonneux ou

poussiéreux.

1 Retirez le joint torique. (Voir illustration

)

Pour retirer le joint torique, appuyez légèrement dessus, puis faites-le glisser

dans le sens de la flèche, comme indiqué sur l’illustration. Le joint torique est

suffisamment lâche pour permettre un retrait aisé.

Prenez garde à ne pas érafler le joint torique avec vos ongles.

N’utilisez pas d’objet pointu ou métallique pour retirer le joint. Ce type d’objet

risque, en effet, d’érafler ou d’endommager la rainure du caisson ou le joint torique.

2 Inspectez le joint torique.

Vérifiez attentivement la présence éventuelle des éléments ci-dessous. Le cas

échéant, nettoyez le joint à l’aide d’un chiffon doux ou d’un mouchoir en papier.

Saletés, sable, cheveux, poussière, sel, particules, etc.

Substances graisseuses.

Salet

Sable Cheveux Poussiére

Sel

Particules

Passez légèrement votre doigt sur le joint torique pour détecter d’éventuelles saletés

invisibles.

Assurez-vous de ne pas laisser de fibres de tissu ou de papier sur le joint torique

après l’avoir nettoyé.

Assurez-vous que le joint torique ne comporte aucune craquelure, déformation,

distorsion, coupure, éraflure, incrustation de sable. Remplacez-le s’il est fendu ou

éraflé.

Craquelure Déformation

Coupures Eraflures Incrustations

de sable

Distorsion

3 Inspectez la rainure du joint torique.

Des grains de sable ou de sel s’incrustent parfois dans la rainure. Retirez-les

soigneusement à l’aide d’un pulvérisateur à air ou d’un disque de coton. Prenez garde

à ne pas laisser de fibres de coton à l’intérieur.

4 Inspectez de la même maniére la surface de contact de l’autre côté du joint

torique.

5 Appliquez une couche de graisse sur le joint torique.

Avec les doigts, étalez une petite goutte de graisse en fine couche sur toute la

surface du joint torique. (Voir illustration )

N’utilisez pas de mouchoir en papier ni de tissu, car les fibres risquent de coller au

joint.

Assurez-vous qu’une fine couche de graisse recouvre en permanence la surface du

joint. La graisse protège le joint et prévient l’usure.

Fixez le joint immédiatement après l’avoir enduit de graisse. Ne posez pas le joint

enduit de graisse sur une table ou une autre surface.

(Suite á la page arrière)

Good example

Bon exemple

Buen ejemplo

Bad example

Mauvais exemple

Mal ejemplo

Wide button

Touche Grand angle

Botón de gran angular

START/STOP button*

1

Touche START/STOP*

1

Botón START/STOP*

1

Telephoto button

Touche Téléphoto

Botón de telefoto

MODE button

Touche MODE

Botón MODE

Rear body

Partie arrière

Parte posterior

del cuerpo

O-ring

Joint torique

Junta tórica

Cord holder

Support de

cordon

Soporte del cable

Audio/Remote

plug

Fiche Audio/

Remote (son/

télécommande)

Clavija de

control

remoto

y audio

Buckle

Fermoir

Hebilla

Desiccant

Dessicatif

Desecador

Telephoto button

Touche Téléphoto

Botón de telefoto

Wide button

Touche Grand

angle

Botón de gran

angular

3

*1 There is a red mark on the START/STOP button.

*2 There is a green mark on the POWER button.

*1 Un repère rouge se trouve sur la touche START/STOP.

*2 Un repère vert se trouve sur le bouton POWER.

*1 Existe una marca roja en el botón START/STOP.

*2 Existe una marca verde en el botón POWER.

3

OPEN

Advertising