Loading the cd, Playing the cd – Sony CMT-L1 User Manual
Loading the CD
on the remote).
The CD cover opens and the function
switches to CD.
Insert a CD and push down on it gently.
The CD is drawn in and playback starts
• To reload the CD, first remove the CD, and then
load it again.
• You can load a CD single (8-cm CD) without an
• Playback starts automatically when you simply load
the CD (CD Auto Play). This function, however,
does not work while Program Play is selected.
If the CD cover does not open when you touch Z (for
example, when you are wearing gloves), touch it with
bare fingers or press the Z button on the remote.
Playing the CD
— Normal Play/Shuffle Play/Repeat
This system lets you play CDs in different play
Press FUNCTION repeatedly until “CD”
appears in the display.
Press PLAY MODE/TUNING MODE in
stop mode repeatedly until the mode
you want appears in the display.
on the remote).
Select a track
Find a point in a
Remove the CD
The CD in original order.
The tracks on the CD in random
The tracks on the CD in any
order that you want (see
“Programing the CD tracks” on
Load with the label side front.
Press CD x.
Press CD u (or CD X on the
remote). Press again to resume
During playback or pause, press
. or > repeatedly until
you find the desired track.
During playback, press and hold
down m or M until you find
the desired point.
Press REPEAT on the remote
repeatedly during playback until
“REP” or “REP1” appears in the
REP: For all the tracks on the
CD up to 5 times.
REP1: For only the currently
To cancel playing repeatedly,
press REPEAT on the remote
repeatedly until “REP” and
“REP1” disappear from the
Touch Z (or press Z on the
remote) to remove the CD, then
touch Z (or press Z on the
remote) again to close the CD