Sony CMT-L1 - Manual (Page 15)

15 GB
Tuner
6
Press TUNING + or – repeatedly to
select the desired preset number.
7
Press ENTER/YES on the remote.
“Complete!” appears, and then the station is
stored.
8
Repeat steps 1 to 7 to preset other
stations.
Tip
Press PLAY MODE/TUNING MODE when you
want to stop scanning.
Setting presets through
manual tuning
1
Press TUNER/BAND to select “FM” or
“AM”.
2
Press PLAY MODE/TUNING MODE
repeatedly until “AUTO” and “PRESET”
disappear from the display.
3
Press TUNING + or – repeatedly to tune
in the desired station.
4
Press MENU/NO on the remote.
5
Press TUNING + or – repeatedly until
“Memory?” appears, and then press
ENTER/YES on the remote.
A preset number appears in the display.
Perform steps 6 and 7 while the preset
number is flashing.
6
Press TUNING + or – repeatedly to
select the desired preset number.
7
Press ENTER/YES on the remote.
“Complete!” appears, and then the station is
stored.
8
Repeat steps 1 to 7 to preset other
stations.
Tuner
Presetting radio stations
The system can store a total of 30 preset
stations (20 for FM and 10 for AM). You can
then tune in any of those stations simply by
selecting the corresponding preset number.
There are two ways to store the preset stations.
To
Automatically tune in
all of the stations that
can be received in
your area and then
store them manually
Manually tune in and
store the radio
frequency of your
favourite stations
Setting presets through
automatic tuning
1
Press TUNER/BAND to select “FM” or
“AM”.
2
Press PLAY MODE/TUNING MODE
repeatedly until “AUTO” appears in the
display.
3
Press TUNING + or –.
The frequency changes as the system scans
for a station. Scanning stops automatically
when a station is tuned in. At that time,
“TUNED” and “STEREO” (for stereo
program only) appear.
If “TUNED” does not appear and the
scanning does not stop
Set the frequency of the desired radio
station as described in steps 2 to 8 of
“Setting presets through manual tuning”.
4
Press MENU/NO on the remote.
5
Press TUNING + or – repeatedly until
“Memory?” appears, and then press
ENTER/YES on the remote.
A preset number appears in the display.
Perform steps 6 and 7 while the preset
number is flashing.
Method
Automatic Tuning Preset
Manual Tuning Preset
continued