Display, Turning off the display — power saving mode, Changing the illumination level – Sony CMT-L1 User Manual
Page 20: Using the display, Turning off the display, Checking the remaining time, Checking the total playing time, Checking a track title, a disc title (cd)
Using the display
Checking the remaining time
Press TIME on the remote repeatedly
The display changes cyclically as follows:
Elapsed playing time on the current track
Remaining time on the current track*
Remaining time on the current CD*
“--.--” appears when you check the remaining time
of a CD track whose number is 21 or over.
“--.--” appears during Shuffle Play of a CD which
has 21 or more tracks, or during Program Play
when a CD track whose number is 21 or over is
Checking the total playing
Press TIME on the remote in stop mode.
Checking a track title, a disc
Press DISPLAY repeatedly.
The CD display changes cyclically as follows:
t Preset Equalizer name*
t Playing time of the CD*
Track title or disc title*
After 8 seconds, the playing time of the CD
The display that appears depends on the current
If the disc is stopped: The total playing time of the
CD is displayed.
If the disc is playing: The elapsed playing time of
the track, remaining playing time of the track, or
remaining playing time of the CD is displayed.
The track title appears during playback (only for
CDs with CD text), and the disc title appears when
the disc is stopped. If a CD that has no title, the
track title or disc title is skipped.
Turning off the display
— Power Saving Mode
Even if the system is off, the system consumes
power to display the clock and to stay
responsive to commands from the remote.
Power Saving mode reduces the amount of
power consumed during standby.
In this mode, the clock is not displayed.
Press DISPLAY or TIME on the remote
while the system is off until the the clock
To cancel Power Saving mode
Press DISPLAY or TIME on the remote while
the system is off.
The display changes as follows:
y No display (Power Saving
* The clock is displayed only if you set the clock.
The timer continues to operate during Power Saving
Changing the illumination
You can change the illumination level for the
Press DIMMER on the remote repeatedly.
The illumination level changes cyclically as
t Low t Off
The illumination level is factory set to high.