Sony DEV-5 - Manual (Page 65)


Table of C
on
ten
ts
M
enu Lists
Inde
x
GB
Setup
(Other setup items)
See “Using menus” (p. 52) on the operation.
The default settings are marked with .
Media Info
You can check the remaining recordable
time for each recording mode of the
memory card for movies and the
approximate free and used media space of
the memory card.
To turn off the display
Select .
Notes
Since there is a management file area, the
used space is not displayed as 0 % even if you
perform [Format] (p. 65).
Format
Formatting deletes all the movies and
photos to recover recordable free space.
Select  .
Notes
Connect this product to the wall outlet (wall
socket) using the supplied AC Adaptor for this
operation (p. 14).
To avoid the loss of important images, you
should save them before formatting the
memory card.
Protected movies and photos will also be
deleted.
While [Executing...] is displayed, do not operate
the buttons on this product, disconnect the AC
Adaptor, or eject the memory card from this
product. (The access lamp is lit or flashing while
formatting memory card.)
Repair Img. DB F.
See page 76, 79.







File Number
You can select the way to assign file number
of photos.
 Series
Assigns file numbers of photos in sequence.
The file number becomes larger each time
you record a photo.
Even if the memory card is replaced with
another one, the file number is assigned in
sequence.
Reset
Assigns file numbers in sequence, following
the largest file number existing on the
recording medium.
When the memory card is replaced with
another one, the file number is assigned for
each memory card.
Data Code
During playback, this product displays the
information (Date/Time, Camera Data,
Coordinates*) recorded automatically at the
time of recording.
 Off
Data code is not displayed.
Date/Time
Displays the date and time.
Camera Data
Displays camera setting data.
Coordinates*
Displays coordinates.
* DEV-5/5K