Sony DRC-BT15 - Manual (Page 8)

DRC-BT15_U2 [US] 3-280-224-11(1)
8
US
DC IN 3V
1 Connect the supplied
AC power adaptor with
the battery charging
stand.
2 Connect the supplied
AC power adaptor to an
AC outlet.
(Rear)
To DC IN
3 V jack
AC power
adaptor (supplied)
Battery charging
stand (supplied)
3 Put the unit on the
battery charging stand.
Rest the unit on the battery
charging stand so that the unit’s
contact point meets the contact
pin on the battery charging stand,
and make sure that the indicator
(red) lights up.
Charging is completed in about
2.5 hours* and the indicator (red)
goes off automatically.
* Time required for empty battery to
recharge.
Note
When you attach the strap to this unit,
do not let the strap get caught between
the unit and the battery charging stand.
Tips
• If the AC power adaptor is connected to
an AC outlet while the unit is turned on,
the unit will be turned off automatically.
• This unit cannot be turned on while
charging.
Battery charging
stand (supplied)
To an AC outlet
Charging the unit
The unit contains a rechargable Lithium-Ion battery, which should be
charged before using for the first time.
Contact pin
Battery charging
stand (supplied)
Wireless Audio
Receiver
01US03GET-BT15_U2.p65 23/10/07, 2:19 pm 8
Black