Sony PEG-NZ90 - Manual (Page 107)

107
Performing a HotSync
®
operation using the Bluetooth™ function
(for Bluetooth™ built-in models only)
Exchanging and updating data using a HotSync
®
operation
(Other HotSync
®
operations)
Tip
If you have renamed a target Bluetooth™ compatible device registered on CLIÉ
handheld, the device may be listed in the previous name when you detect target
Bluetooth™ compatible devices.
In this case, follow the procedure below.
1 Tap the Menu icon from the Bluetooth Preferences screen (page 69).
2 Tap Disable device name cache from the Options menu.
3 Detect target Bluetooth™ compatible devices.
7
Select a computer you want to register and tap OK.
The Add Trusted Device dialog box is displayed.
8
Tap Yes.
The Bluetooth Security dialog box is displayed on your CLIÉ
handheld.
9
Enter a passkey and tap OK on your CLIÉ handheld.
The Passkey Input dialog box is displayed on the screen of the selected
computer.
Tip
What is a passkey?
A passkey is a secret code entered by a user to enable two Bluetooth compatible
devices to communicate. A user can enter any characters and numbers to create a
passkey.
The same passkey should be entered at both devices to permit a communication
between those devices. A user can change a passkey for every communication
session as long as the same one is used for both devices. Once a communication is
permitted, the communication between the devices will be available without
entering the passkey for a preset period of time.
10
Enter the same passkey you entered in step 9 on your
computer.
If the name you entered in step 3 is added to the Available
Connections: list, the preparation is complete.