Sony PEG-NZ90 - Manual (Page 130)

Using “Memory Stick
®
” media 130
Using “Memory Stick
®
” media
Starting an application on “Memory Stick” media
You can start the applications in “Memory Stick” media in the same way as the
applications of your CLIÉ handheld. While the power of your CLIÉ handheld is on, the
applications in the “Memory Stick” media will be displayed on the Application Launcher
screen automatically if you insert the “Memory Stick” media into the slot (the feature
does not work when certain application is running).
To switch from the Application Launcher screen to the screen where the applications in
“Memory Stick” media are displayed, perform the following steps.
Tip
You cannot start applications other than those saved in the /PALM/Launcher folder by
performing the following steps.
1
Display the Application Launcher screen, while the “Memory
Stick” media is inserted in the CLIÉ handheld.
2
Press the BACK button to select the group.
3
Rotate the Jog Dial™ navigator to select Card.
The applications on “Memory Stick” media are displayed.
You can start an application in the same way that you start an application
of your CLIÉ handheld.
If you have assigned a name to the “Memory Stick” media, then the
Card is displayed in that name.
Tip
You can also tap the Card icon to select it.
Note
Depending on the application, some of the features may not work. In this case, use the
CLIE Files application to copy the data in the CLIÉ handheld and use the copied data.