Sony DCR-IP220 - Manual (Page 19)

19
Preparation
Registering a Bluetooth device
To communicate with a Bluetooth device, you need to register it. Here we describe how
to register the Sony Modem Adaptor with Bluetooth Function. Once registration is
complete, you do not have to reregister the Bluetooth device as long as you do not
cancel registration. You can register up to three Bluetooth devices. Also, refer to the
operating instructions supplied with your Bluetooth device.
For more information about Bluetooth devices compatible with your camcorder, access
the following URL: “http://www.myimagecam.com/”
Using your Modem Adaptor with Bluetooth Function
Connecting your camcorder to a Bluetooth device by Bluetooth wireless technology and
communicating.
Notes
•When using Sony BTA-NW1/BTA-NW1A Modem Adaptor with Bluetooth Function,
place it at a location that has no obstacles between your camcorder and the device.
The distance between the devices must be within 10 m (33 feet).
•The connection may be interrupted depending on the communication conditions.
1 Preparing the Modem Adaptor with Bluetooth Function
Set the Modem Adaptor with Bluetooth Function to connection standby (BONDING).
For details, refer to the operating instructions supplied with your Modem Adaptor with
Bluetooth Function.
Communicating with Bluetooth devices
Modem Adaptor with Bluetooth
Function (not supplied)
your camcorder