Sony DCR-IP220 - Manual (Page 46)

46
3 Setting your provider manually
Set your provider preferences according to the requirements of your provider. When
you do not understand the setup items, consult your provider.
(1) Tap [PPP].
(2) Set up the following items:
ID: Enter the login name you use for accessing your provider using a dial-up
connection.
Tip
This “ID” is also referred to as a “user ID”, “login name”, “PPP login name”,
“network ID”, “account name”, “logon name”, “user name”, etc.
Password: Enter the password you use for accessing your provider using a
dial-up connection (p. 114).
Tip
This “Password” is also referred to as a “PPP password”, “network
password”, “connection password”, etc.
DNS1: Enter the DNS (Domain Name System) server address of your provider.
Tips
• This “DNS1” is also referred to as a “name server”, “primary DNS server”,
“primary name server”, etc.
• This entry may be unnecessary, depending on your provider. For details,
consult your provider.
DNS2: Enter the secondary DNS server address of your provider, if necessary.
This entry may be unnecessary, depending on your provider. For details,
consult your provider.
Tip
This “DNS2” is also referred to as a “secondary DNS server”, etc.
TEL No. 1: Enter the telephone number of your most convenient access point
(p. 114).
TEL No. 2/TEL No. 3: Enter the second and third telephone numbers, if
necessary.
Setting network preferences