Sony DCR-IP220 - Manual (Page 70)

70
4 Sending email
Tip
You can send an email message with your signature. For details, see “Attaching your
signature to a message” (p. 74).
(1) Select the image to attach to email.
For details, see “Attaching images to email” (p. 73).
(2) Check the message.
For details, see “Checking or editing a message” (p. 71).
(3) Tap [Send].
The screen for verifying the connection appears.
Set your Bluetooth device to connection standby with your camcorder
beforehand. For details, refer to the operating instructions supplied with your
Bluetooth device.
(4) Check the telephone number of the access point.
When dialing other telephone numbers
Tap [TEL No.]. The list of the registered telephone number(s) appears. Tap the
desired telephone number to select it.
To connect to an outside line, for example in a hotel, check the item “Prefix
No.” and enter the prefix number.
(5) Tap [Connect].
Your camcorder starts dialing the selected telephone number. After the
sending is completed, the message “Sending Mail Complete” appears. The
phone line is automatically disconnected.
,
Using email