Sony DCR-IP220 - Manual (Page 36)

36
3 Entering the telephone numbers of your access points
For more information on the telephone numbers of access points (p. 114), refer to the
supplied flyer “Getting Online with your Sony Network Handycam® camcorder.”
(1) Tap [TEL1].
The character input screen appears.
,
(2) Enter the telephone number of the access point.
For details on how to input characters, see “How to input characters”(p. 8).
Note
Do not insert hyphens or spaces in the telephone number. (e.g. 0312345678)
(3) Tap [Enter].
The Provider Setting: “So-net” screen appears again.
,
Tip
You can also register the telephone numbers of access points into [TEL2] and
[TEL3]. If necessary, enter the numbers into [TEL2] and [TEL3].
(4) Tap [Exit].
The telephone number registration is complete, and the Network Setup screen
appears again.
(5) Tap [Exit].
The setup is complete, and the setup screen appears again.
For more detailed setup, go to “Setting other preferences” (p. 49).
Setting network preferences