43 tape deck, Tuner – Sony MHC-RXD5 User Manual

Page 43

Advertising
background image

43

Tape Deck

The tape does not record.

•No tape in the cassette holder.
•The tab has been removed from the

cassette (see “To save a tape
permanently” on page 40).

•The tape has reeled to the end.

The tape does not record nor play or there
is a decrease in sound level.

•The heads are dirty. Clean them (see

“Cleaning the tape heads” on page 41).

•The record/playback heads are

magnetized. Demagnetize them (see
“Demagnetizing the tape heads” on page
41).

The tape does not erase completely.

•The record/playback heads are

magnetized. Demagnetize them (see
“Demagnetizing the tape heads” on page
41).

There is excessive wow or flutter, or the
sound drops out.

•The capstans or pinch rollers are dirty.

Clean them (see “Cleaning the tape
heads” on page 41).

Noise increases or the high frequencies are
erased.

•The record/playback heads are

magnetized. Demagnetize them (see
“Demagnetizing the tape heads” on page
41).

After pressing

( (9) or 6, there is a

mechanical noise, “EJECT” appears in the
display, and the unit enters standby mode
automatically.

• The cassette tape was not inserted

correctly. Eject the tape and turn the
power back on.

Tuner

Severe hum or noise (“TUNED” or
“STEREO” flashes in the display).

•Adjust the antenna.
•The signal strength is too weak. Connect

the external antenna.

A stereo FM program cannot be received in
stereo.

•Press REPEAT STEREO/MONO so that

“MONO” disappears.

If other troubles not described
above occur, reset the system as
follows:

1 Unplug the power cord.
2 Plug the power cord back in.
3 Press

p, ENTER/NEXT, and

at the

same time.

4 Press

to turn on the power.

The unit is reset to factory settings. All the
settings you made, such as the preset stations,
clock, and timer are cleared. You should set
them again.

Advertising