Sony DCR-HC1000 - Manual (Page 100)

Dubbing/Editing 100
Checking and adjusting the
recorded sound
1
Play back the tape on which you have
recorded audio in “Recording sound”
(p. 99).
2
Touch .
3
Touch [MENU].
4
Touch / to select
(STANDARD SET), then touch .
5
Touch / to select [AUDIO
MIX], then touch .
6
Touch / to adjust the balance
between the original sound (ST1) and
the sound recorded afterwards (ST2).
Then, touch
.
The original sound (ST1) is output in the
default setting.
The adjusted audio balance returns to the
default setting in about 5 minutes after the
battery pack or other power sources have
been disconnected.
Deleting recorded
pictures
You can delete all or selected pictures stored
on a “Memory Stick Duo.”
1
Slide the POWER switch repeatedly to
select the PLAY/EDIT mode.
2
Touch .
3
Touch (previous)/ (next) to
select a picture you want to delete.
4
Touch .
5
Touch [YES].
The selected picture is deleted.
To cancel deletion, touch [NO].
To delete all pictures at once
Select the (MEMORY SET) menu, then
[ ALL ERASE] (p. 64).
OK
0:00:00:00 60min
REC MODE
ALL ERASE
AUDIO MODE
TAPE TITLE
VOLUME
TITLE DEL
MULTI SOUND
SP
AUDIO MIX
0:00:00:00 60min
ST2/
REAR ST1/
FRONT
101 2 / 10
101–0002
60min
P-MENU
MEMORY PLAY
101 2 / 10
101–0002
DELETE
Delete this image?
NO YES