Using the flash, Recor d ing – Sony DCR-HC1000 User Manual

Page 31

Advertising
background image

Recor

d

ing

Recording

31

When the image quality is [STANDARD]
(number of images)

The image size of 1152 × 864 is 200kB, that of
640 × 480 is 60kB.

Using the flash

The recommended distance to the subject
when using the built-in flash is 0.3 to 2.5 m (1
to 8 feet).
Your camcorder is set to auto flashing by
default, so according to the lighting
conditions, the flash may be automatically
activated when you press PHOTO.
Follow the steps below when you always
want to use the flash, or when you do not
want to use the flash at all.
The available settings vary according to what
you selected in [REDEYE REDUC] of
[FLASH SET] in the

(CAMERA SET)

menu (p. 60).

Press

(flash) repeatedly to select a

setting.

The settings are displayed cyclically in the
following order.

When the red eye reduction feature
is turned off

No indicator displayed: Automatically
flashes when there is not enough
surrounding light.
m

(Forced flash): Always uses the flash

regardless of the surrounding brightness.
m

(No flash): Always records without

using the flash.

When the red eye reduction feature
is turned on

(Auto red-eye reduction): Pre-flashes to

reduce red-eye before the flash
automatically flashes when there is not
enough surrounding light.
m

(Forced red-eye reduction): Always

uses the flash and the red-eye reducing pre-
flash regardless of the surrounding
brightness.
m

(No flash): Always records without

using the flash.

b

Note

• Remove the dust from the surface of the flash lamp

before using it. You may not get a sufficient amount
of flash if the dust discolors or sticks to the lamp due
to the heat from flashing.

• The red-eye reduction may not produce the desired

effect due to individual differences and other
conditions.

• The flash charge indicator flickers while charging,

and remains lit when the battery charge is complete.
(In the CAMERA-TAPE mode, it takes a while to
fully charge the flash lamp since it charges its battery
with the flash lamp open.)

• The flash will not work during the following

operations:
– Digital effect
– Burst
– During tape recording
– [16:9 WIDE] mode
– Shutter speed 1/30 second or slower

1152 Ч 864

640 Ч 480

8MB (supplied)

37

120

16MB

74

240

32MB

150

485

64MB

300

980

128MB

600

1970

256MB
(MSX-M256)

1000

3550

512MB
(MSX-M512)

2050

7200

(flash)

,

continued

Advertising