Sony DCR-HC1000 - Manual (Page 13)

Getting started
Get
ting st
art
e
d
13
Step 2: Charging the
battery pack
You can charge the battery by attaching the
“InfoLITHIUM” battery pack (F series) to
your camcorder.
b Note
• Only the “InfoLITHIUM” battery pack (NP-FF70/
FF71) can be used (p. 123).
• Do not short-circuit the DC plug of the AC Adaptor
or battery terminals with any metallic objects. This
may cause a malfunction.
• Use a nearby wall outlet when using the AC
Adaptor. Disconnect the AC Adaptor from the wall
outlet immediately if any malfunction occurs.
1
Push the catch on the battery
compartment lid in the direction of the
arrow 1 to open the lid.
2
Insert the battery pack in the direction
of the arrow until it clicks.
3
Close the battery compartment lid.
4
With the v mark on the DC plug facing
the battery compartment lid side,
connect the AC Adaptor to the DC IN
jack on your camcorder.
5
Connect the power cord to the AC
Adaptor.
6
Connect the power cord to the wall
outlet.
To the wall outlet
DC IN jack
Power cord
AC Adaptor
DC plug
v mark
, continued