Sony DCR-HC1000 - Manual (Page 39)

Recor
d
ing
Recording 39
[TRAIL]
You can record a picture so that an incidental
image like a trail is left.
[OLD MOVIE]
You can add an old movie-type atmosphere to
pictures. Your camcorder automatically records
pictures in the letterbox mode for all screen size,
sepia in color, and at a slower shutter speed.
1
Slide the POWER switch to select the
CAMERA-TAPE mode.
2
Touch .
3
Touch [D. EFFECT].
If the item is not displayed on the screen,
touch
/ . If you cannot find it, touch
[MENU], and select it from the (PICT.
APPLI.) menu.
4
Touch the desired effect, then adjust
the effect by touching
(decrease) /
(increase) and touch .
When you touch [STILL] or [LUMI. KEY],
the image displayed on the screen at that
time is saved as a still image.
5
Touch .
appears.
To cancel Digital effect
Follow steps 2 and 3, then select [OFF] in step
4.
b Note
• You cannot use Digital effect together with:
– FADER function
– Memory overlap
– MEMORY MIX function
– Shutter speed 1/30 second or slower
• You cannot use [OLD MOVIE] together with:
– [PROGRAM AE] except [AUTO]
– [16:9 WIDE] mode
– Picture effect ([PICT. EFFECT])
– [MANUAL] of [SHUTTR SPEED]
z Tip
• You can create a picture with color and brightness
reversed while recording on a tape. For details, refer
to Picture effect ([PICT. EFFECT], p. 67).
Effect Items to adjust
[STILL] The degree of transparency
of the still image on which
you want to superimpose a
movie.
D. EFFECT: OFF
OFF STILL
1/2
0:00:00
FLASH
LUMI.
KEY
60min STBY
OK
0:00:00
D. EFFECT: STILL
60min STBY
Adjustment screen example:
[FLASH] The interval of frame-by-
frame playback.
[LUMI. KEY] The color scheme of the
area in the still image
which is to be swapped
with a movie.
[TRAIL] The fade time of the
incidental image.
[OLD MOVIE] No adjustment necessary.
Effect Items to adjust