Sony SHAKE-99 - Manual (Page 16)

model name [SHAKE-99/SHAKE-77/SHAKE-55/SHAKE-33]
[4-487-569-13(1)] GB
16 GB
filename[D:\NORM'S JOB\SONY HA\SO140003\SHAKE-99_77_55_33 (PMRF
02)\4487569131_GB\06BAS.fm] masterpage:Left
Setting the clock
You cannot set the clock in Power Saving
Mode.
1
Press "/1 to turn on the system.
2
Press TIMER MENU.
If “PLAY SET” appears in the display
panel, press
/ repeatedly to select
“CLOCK SET”, then press .
3
Press / repeatedly to set the
hour, then press .
4
Press / repeatedly to set the
minutes, then press .
Changing the display
mode
The demonstration appears in the display
panel once you plug the power cord into a
wall socket.
Press DISPLAY repeatedly while
the system is turned off.
Demonstration
The display changes and the indicator
flashes even when the system is turned
off.
No display (Power Saving Mode)
The display is turned off to conserve
power. The timer and clock continue to
work internally.
Clock
The clock display automatically turns to
Power Saving Mode after a few seconds.
Playing a disc
1
Press CD.
2
Press Z OPEN/CLOSE on the
unit.
3
Load a disc with the label side
facing up on the disc tray.
4
Press Z OPEN/CLOSE on the
unit to close the disc tray.
Do not forcibly push the disc tray to
close it as this may cause a
malfunction.
5
Press N to start playback.
Disc/USB Playback
When you play
back an 8 cm
disc such as a
CD single, place
it on the inner
circle of the tray