Sony SHAKE-99 - Manual (Page 33)

model name [SHAKE-99/SHAKE-77/SHAKE-55/SHAKE-33]
[4-487-569-13(1)] GB
33 GB
filename[D:\NORM'S JOB\SONY HA\SO140003\SHAKE-99_77_55_33 (PMRF
02)\4487569131_GB\07OTH.fm] masterpage:Right
Ot
he
r Op
er
a
tio
ns
Note
The sound from the microphone will not be
transferred to the USB device during USB
transfer.
Changing the spectrum
pattern of the display
panel
1
Press OPTIONS on the unit.
2
Press / repeatedly to select
“SPECTRUM”, then press .
3
Press / repeatedly to select
the spectrum pattern you want,
then press
.
To exit the options menu, press
OPTIONS on the unit.
Viewing information in
the display panel
Press DISPLAY repeatedly when
the system is turned on.
You can view the information as follows:
• For AUDIO CD:
– The elapsed playing time and
remaining playing time during
playback.
– The total playing time when playback
is stopped.
• For audio files:
– The elapsed playing time, file name
and folder name.
– The title, artist and album information.
Note
The elapsed playing time of an audio file
encoded using a VBR (variable bit rate) is not
displayed correctly.
Changing the
illumination pattern
and color
Press LED PATTERN or LED
COLOR to show the current setting.
Press repeatedly to select the
illumination pattern or color on the
unit and the speakers.
To turn off the illumination, press LED
PATTERN repeatedly to select “LED
OFF”.
Note
If the illumination brightness is glaring, switch
on the room lights or turn off the illumination.
Using the timers
The system offers three timer functions.
You cannot activate both the Play Timer
and the Recording Timer at the same time.
If you use either with the Sleep Timer, the
Sleep Timer has priority.
You can fall asleep while listening to
music. The system turns off after the
preset time.
Press SLEEP repeatedly.
To cancel Sleep Timer, press SLEEP
repeatedly to select “SLEEP OFF”.
Tip
To check the remaining time before the system
turns off, press SLEEP.
Sleep Timer