My show was not recorded – Sony PCV-RZ49G User Manual
Page 266
My show was not recorded
There are many reasons why your show might not have been recorded. First check the Recorded TV history page for information on
why the show might not have been recorded. Once you find out why, then go to the table below to jump to information on how to
correct the situation or avoid it in the future.
To see the detailed history information for a recording
1.
Press the START
button on the remote, and then select My TV.
2.
Select Recorded TV.
3.
Select Scheduled.
4.
Select History.
5.
To organize the list, select one of the following:
Sort by date
Sort by status
Sort by name
6.
Use the arrow buttons on the remote to scroll through the list. The status for each show is listed as either Recorded, Not
Recorded, Deleted, Canceled, Partial, or Conflict.
7.
To get more detailed information on the recording status, press OK to select that show. The History page displays including a
detailed explanation of the history for that recording item.
8.
To find out how to correct the problem or avoid it in the future, locate in the list below the reason why your show was not recorded
and then go to the link provided for additional information.
Description
F or more information
There was a recording conflict that resulted in your show not being recorded.
Media C enter determined the show was recorded previously. Media C enter cannot record a show in a series if it has already been
recorded or deleted within the last 8 weeks.
There is no available disk space and no recordings could be deleted to create more space to record.
The Keep up to series limit that you specified was reached so no additional recordings were made for that series.
was reached so no additional recordings were made
There was no TV signal because the channel was not available or the tuner was unplugged or not working.
The tuner was in use when the show was scheduled to record and the prompt to change channels to record the show was declined.
Your PC was turned off or lost power during the time the show was scheduled to record.
The IR cable was disconnected and Media C enter could not change channels to start the recording.
Troubleshoot your IR control cable
The TV broadcaster changed the schedule or channel number for a specific network or the show did not air.
Page 266