Sony MDS-S40 - Manual (Page 25)

25
Playing MDs
Creating Your Own
Program
(Program Play)
You can pick out the tracks that you like and specify the
playback order in a program containing up to 25 tracks.
LEVEL/DISPLAY/CHAR
PLAY MODE AMS M CLEAR m
MENU/NO YES N
` / 1 N z x X Z
> .
m M
H
> 10
MENU/NO
DISPLAY
CLEAR
PLAY MODE
YES
m/M
./>
. >
m M
z x
X H
Z
` / 1
+
–
> . X
Programming the tracks
1 While the deck is stopped, press MENU/NO twice.
“Setup Menu” appears in the display.
2
Turn AMS (or press ./> repeatedly) until
“Program ?” appears, then press AMS or YES.
3 Turn AMS until the track number you want to add
to the program appears, then press AMS or M (or
use the number button(s) to enter the track
directly).
If you entered the wrong track number
Press m/M repeatedly until the wrong track
number flashes, then do step 3 above again.
To enter a track number over 10 Z
Use >10. For details, see page 22.
To check the total playing time of the program
Press LEVEL/DISPLAY/CHAR (or DISPLAY).
4 Repeat step 3 to enter other tracks.
5 Press YES.
“Complete!!” appears and the program is completed.
6
Press PLAY MODE repeatedly until “PROGRAM”
lights up in the display.
7 Press N.
Program Play starts.
To stop Program Play
Press x.
To resume normal play
Press PLAY MODE repeatedly until “PROGRAM” turns
off.
z
The program remains even after Program Play ends or is
stopped
Press N to play the program again.
Notes
• If you eject the MD or disconnect the AC power cord, the
program will be lost.
• The display shows “- - - m - - s” when the total playing time of
the program exceeds 199 minutes.
• “ProgramFull!” appears when you program 25th track.
Checking the contents of the program
While the deck is stopped and “PROGRAM” lights up,
press LEVEL/DISPLAY/CHAR (or DISPLAY) repeatedly.
The first several tracks in the program appear in the
display. To see the rest of the program, turn AMS (or
press ./> repeatedly).
Number
buttons