Sony SVL241190X - Manual (Page 304)

1. Connect one end of a 300-ohm twin lead cable (1) to the screw-type grips at your
antenna outlet (2). Connect the other end to the grips on a VHF/UHF RF
combiner/transformer (3).
2. Connect a coaxial cable feed connector (4) to the VHF/UHF RF combiner/transformer
(3).
3. Connect one end of the TV coaxial cable (5) to the feed connector (4). Connect the
other end to the CABLE/ANT (DIGITAL/ANALOG) port (6) on the computer.
Related Topic
Connecting to Standard Cable Access (CATV)<TV tuner board installed models>
Connecting to an Antenna (Air) for Digital Television System (ATSC Signal Standard)<TV
tuner board installed models>
© 2012 Sony Corporation
304
Click to Search