Inserting/removing “memory stick, Details, How to use – Sony SVL241190X User Manual

Page 384

Advertising
background image

VAIO User Guide SVL2411 Series

Back

|

Back to Top

Troubleshooting

How to Use

Parts Description

Setup

Network / Internet

Connections

Settings

View

Playback

Backup / Recovery

Security

Other Operations

Notifications

MONITOR Function

Inserting/Removing “Memory Stick”

You can use “Memory Stick” to save data or transfer images between a digital camera and
your VAIO computer. To insert/remove “Memory Stick”, follow these steps.

To Insert “Memory Stick”

1. Locate the “Memory Stick” slot.

Hint

The “Memory Stick” slot on your computer also works as an SD memory card slot.

2. Hold “Memory Stick”

[Details]

with the arrow pointing toward the slot on the left side of

your VAIO computer, and carefully slide it into the slot until it clicks into place.

“Memory Stick” is automatically detected by your system and the contents of “Memory Stick”
are displayed*. If nothing appears on the desktop, click

(Start) and Computer, and

double-click the “Memory Stick” icon*.
* The drive letter for the “Memory Stick” slot, such as “E:”, may vary depending on the

system configuration of your VAIO computer.

Note

The “Memory Stick” icon will appear in the Computer window after you insert “Memory
Stick” into the slot.
If “Memory Stick” cannot be inserted easily, remove it gently, and verify you are inserting
it in the proper direction. Be sure to hold “Memory Stick” with the arrow pointing in the
correct direction as you insert it into the slot. To avoid damaging your VAIO computer or
the media, do not force “Memory Stick” into the slot if you cannot insert it smoothly.

Hint

When you insert “Memory Stick” into the slot for the first time, you may be prompted to
install driver software. If prompted, follow the on-screen instructions to install the
software.

To remove “Memory Stick”

1. Locate the “Memory Stick” slot.

Hint

The “Memory Stick” slot on your computer also works as an SD memory card slot.

2. Check that the Media Access indicator light is off.
3. Push in “Memory Stick” toward your VAIO computer and release.
4. Pull “Memory Stick” out of the slot.

Note

Do not remove “Memory Stick” while the Media Access indicator light is on. If you do,
you may lose data. Large volumes of data may take time to load, so make sure the

384

Click to Search

Advertising
This manual is related to the following products: