Sony HVL-LE1 - Manual (Page 23)

Products
HVL-F43AM
Sony A System HVL-F43AM Flash Unit.
Powerful range, fast recharging, versatile
bounce angles, intelligent features like
auto WB, auto zoom, wireless operation
(guide number: 43).
Specifications
Flash
• Flash Type: Auto electronic flash (clip-on type)
• Flash Modes: Automatic Light Control (TTL),
Continuous (10 flashes/sec., up to 40), pre-flash control,
manual control
• Flash Coverage: Bounce angles: Upward - 150 degrees;
Left - 90 degrees; Right - 90 degrees; Down - 8 degrees
• Flash Metering System: Direct TTL
• Guide Number: 43
• Modes: Wireless, Bounce, Modeling, Multi-burst
• Number of Flashes: 10/sec. up to 40 total
• Recycling Time: 2.9 sec.
Advanced Features
• Smooth Slow Rec
Weights and Measurements
• Dimensions (Approx.): (W x H x D) 3 x 5-1/8 x 3-1/2"
(75 x 129 x 87mm)
• Weight (Approx.): 12oz (340g)
(excluding AA batteries)
Power
• Battery Type: AA Alkaline /AA Ni-MH-requires 4
General
• Material: Poly-carbonate plastic
Operating Conditions
• Storage Temperature: -4 to +140°F
(-20 to +60°C)
High-power illumination
High-power illumination (guide number: 43)
Longer effective range
Longer effective range of over 30ft (10.5m)
“Quick Shift Bounce”
The innovative “Quick Shift Bounce” system allows the
HVL-F43M to orbit 90 degrees left and right, allowing
you to maintain horizontal light distribution even when
shooting vertically. In addition to pivoting side-to-side,
the flash unit can also tilt down 8 degrees or back 150
degrees, ensuring customers the lighting freedom they
need to capture that perfect shot.
Versatile bounce angles
Versatile bounce angles: 90° up, 90° left. This allows
the flash head to be rotated while maintaining the
set bounce angle, so you can quickly switch between
horizontal and vertical format without changing
the light angle.
Built-In Bounce sheet
The built-in bounce sheet can be used even when
shooting in a vertical position without changing the
angle of reflected light.
Auto white balance
Auto white balance (signals color temp. to camera)
Auto zoom
Auto zoom optimized for camera sensor size
Dust and Moisture resistant design
Sealing materials are set at joints of outer materials
(body, LCD panel, Mounting Foot etc.) and around
movement/operating parts thereby increasing the life
of your flash unit.
Modeling light capability
Modeling light capability allows the HVL-F43M to pulse,
helping photographers determine where shadows will
fall before taking the picture, so they can alter lighting
or subject positioning as necessary.
36 42 43 56 60 20
44 45