Sony SRS-X2 User Manual

Page 65

Advertising

Hint

When you set the volume to the maximum or minimum, the

(power) indicator flashes three times.

To use this speaker at a loud volume, connect it to an AC outlet. Also, make sure that the CHARGE indicator is not

flashing.

Depending on the BLUETOOTH device, it may be necessary to adjust the volume or set the audio output setting on

the connected device.

Note

If the communication condition is poor, the BLUETOOTH device may react incorrectly to operations on the speaker.

When you connect a portable audio device, etc., to the speaker's AUDIO IN jack while listening to music via

BLUETOOTH connection, the speaker turns to AUDIO IN mode automatically. In this case, the sound of the

BLUETOOTH device is not output (the BLUETOOTH connection is not terminated). When you listen to the sound from

the BLUETOOTH device again, disconnect the portable audio device, etc., from the speaker's AUDIO IN jack.