Sony SRS-X2 User Manual

Page 70

Advertising

When you press the VOL (volume) -/+ buttons, the

(power) indicator flashes once in green.

When you press the VOL (volume) –/+ buttons at the lowest or highest level, the

(power) indicator flashes

three times in green.

4. To end a call, press the

(call) button.

If you were listening to music when the call arrived, playback will be resumed when the call ends.

Hint

Some BLUETOOTH mobile phones have handset use priority when receiving a call. In the case of the HFP or HSP

connection, talk on the speaker by pressing and holding the

(call) button for about 2 seconds, or by using your

BLUETOOTH mobile phone.

If you adjust the volume on the speaker when not talking, the playback volume is adjusted.

If the caller cannot hear or can barely hear your voice, talk more directly into the microphone of the speaker.

During a call, you can also adjust the volume by operating your BLUETOOTH mobile phone.

Note

The sound is output from the left speaker only during a call.

Depending on the BLUETOOTH mobile phone, playback may not pause when an incoming call arrives.

Use a BLUETOOTH mobile phone at least 50 cm from the speaker. Noise may result if the speaker and the

BLUETOOTH mobile phone are too close.