Sony NEX-VG30H - Manual (Page 21)

1
Table of C
on
ten
ts
Sear
ch image
Inde
x
US
If dust or debris adheres on the image sensor
Turn off the camcorder and detach the lens. Clean the image sensor and the surrounding area
using a blower (sold separately), and then reattach the lens.
Notes
Do not use a spray blower because it may scatter water droplets inside the camcorder body.
Do not put the tip of a blower into the cavity beyond the mount, so that the tip of the blower does not
touch the image sensor.
Hold the camcorder’s face downward to prevent the dust from resettling in the camcorder.
Do not apply a mechanical shock to the camcorder during cleaning.
If you cannot clean the image sensor by the above procedure, consult your Sony dealer or local authorized
Sony service facility.
Mount Adaptor
Using a Mount Adaptor (sold separately), you can attach an A-mount lens (sold separately) to
your camera. For details, refer to the operating instructions supplied with the Mount Adaptor.
The available functions differ depending on the Mount Adaptor type.
Functions LA-EA1 LA-EA2
Autofocus Available with SAM/
SSM lens only *
Available
AF system Contrast AF Phase-detection AF
AF/MF Select Switchable on the lens SAM/SSM lenses: switchable on the lens
Other lenses: switchable on the FOCUS
button
Autofocus Mode (Only
photo mode)
Single Single/Continuous





