Memory card, Recording – Sony NEX-VG30H User Manual
Page 89
Table of C
on
ten
ts
Sear
ch image
Inde
x
US
The buttons on the touch panel do not
work correctly or do not work at all.
Adjust the touch panel ([Calibration]) (p. 103).
The image in the viewfinder is not clear.
Move the viewfinder lens adjustment lever
until the image appears clearly (p. 26).
No display on the LCD screen although it
is open.
If the eye sensor switches to the viewfinder,
the LCD screen turns off. Set [VF/Panel] to
[Panel] (p. 84).
Memory card
Operations using the memory card
cannot be performed.
If you use the memory card formatted on a
computer, format it again on your camcorder
(p. 81).
Images stored on the memory card
cannot be deleted.
The maximum number of images that you can
delete on the index screen at one time is 100.
You cannot delete the protected images.
The data file name is not indicated
correctly or flashes.
The file is damaged.
The file format is not supported by your
camcorder (p. 100).
Recording
Refer also to “Memory card” (p. 89).
Pressing START/STOP or PHOTO does not
record images.
The playback screen is displayed. Press MODE
to turn on the (Movie) or (Photo) lamp
(p. 30).
Your camcorder is recording the image you
have just shot on the memory card. You
cannot make new recording during this
period.
The memory card is full. Delete unnecessary
images (p. 51).
When [Shooting w/o Lens] (p. 85) is set to
[Disable], shooting is not possible in the
following cases;
The lens is not attached correctly.
The attached lens does not support the E-
mount lens communication standard.
Check the dedicated support web site or consult
your local authorized Sony service facility on
compatible lenses.
Total number of movie scenes or photos
exceeds the recordable capacity of your
camcorder. Delete unnecessary images (p. 51).
The temperature of your camcorder is
extremely high. Turn off your camcorder and
leave it for a while in a cool place.
The temperature of your camcorder is
extremely low. Turn off your camcorder and
take it to a warm place. Leave the camcorder
there for a while, then turn on the camcorder.
The lens is not attached correctly. Reattach
the lens.
The access lamp remains lit or flashing
even if recording was stopped.
Your camcorder is recording the scene you
have just shot on the memory card.
The imaging field looks different.
The imaging field may look different
depending on the condition of your
camcorder. This is not a malfunction.
The actual recording time for movies is
less than the expected recording time of
the recording media.
Depending on the recording conditions, the
time available for recording may be shorter, for
example when recording a fast moving object,
etc (p. 96).
The camcorder stops operating.
The temperature of your camcorder is
extremely high. Turn off your camcorder and
leave it for a while in a cool place.