Sony NEX-VG30H - Manual (Page 84)


Table of C
on
ten
ts
Sear
ch image
Inde
x
US
Notes
When you connect the camcorder to other
devices using the [MTP] mode, movies that
have been recorded with the same image quality
as the one currently selected (selected with
the [ / Setting] menu) can only be
displayed on the connected device.
When the camcorder is connected to an
external device in the [MTP] mode, movie
files will be displayed with the recorded
date, however, some information, such as
area information, included in the movie files
cannot be displayed on the connected device.
To import images from the camcorder to your
computer, use the supplied “PlayMemories
Home” software.
If the “Device Stage * ” window does not open
when you connect the camcorder to a computer
equipped with Windows 7, set [USB Connect
Setting] to [Auto].
* “Device Stage” is a menu of Windows 7, that is
used to manage devices (camcorder, camera,
etc.) that are connected to the computer.
Disc Burn
Movies and photos recorded on your
camcorder can be saved on a disc with one
touch.
Notes
[Disc Burn] is not available even though the
camcorder is connected to a computer.
Beep
 On
A melody sounds when you start/stop
recording, or operate the touch panel.
Off
Cancels the melody.
LCD Brightness
You can adjust the brightness of the LCD
screen.
 Normal
Normal setting (normal brightness).






Bright
Select this when the LCD screen is not bright
enough.
Tips
This adjustment does not affect the recorded
images in any way.
The brightness is set to [Bright] automatically
when using the AC Adaptor.
VF Color Temp.
You can change the color temperature of
the viewfinder with the MANUAL dial or
+/-. When the color temperature value is
lowered, the viewfinder is tinged with red
and when raised, the viewfinder is tinged
with blue.
VF/Panel
The camcorder detects the condition and
switches the display between the viewfinder
and LCD screen.
Auto
The camcorder automatically switches the
display between the viewfinder and the LCD
screen using eye sensor control.
 Panel
The screen is displayed on the LCD screen
when the panel is opened.
Notes
If the eye sensor does not work even though
your eye moves close to the viewfinder, the
screen will be displayed on the LCD screen,
even though [VF/Panel] is set to [Auto].
Display Setting
You can set the duration of displaying the
icons or indicators on the LCD screen.
 Auto
Displays for about 3 seconds. The rec
button on the LCD screen is displayed when
shooting.




