Sony NEX-VG30H - Manual (Page 45)


Table of C
on
ten
ts
Sear
ch image
Inde
x
US
When you connect your camcorder with an
HDMI cable (sold separately), the sound of high
definition image quality (HD) movies recorded
in 5.1ch sound is automatically output in 5.1ch
sound. The sound of standard definition image
quality (STD) movies is converted to 2ch.
Tips
You can select the recording sound from [5.1ch
Surround] ( ) or [2ch Stereo] ( )
([Audio Mode], p. 75).
You can create a disc, which contains the movies
recorded on your camcorder, on a computer
using the supplied software “PlayMemories
Home.” If you play the disc on a 5.1ch surround
system, you can enjoy realistic sound.
Recording in mirror mode
Open the LCD panel 90 degrees to the
camcorder (), then rotate it 180 degrees
to the lens side ().
Tips
A mirror-image of the subject appears on the
LCD screen, but the image will be normal when
recorded.
The camcorder can display an image on either
the LCD screen or viewfinder.
Recording at a different angle
Your camcorder can record in the following
angles according to the object.
Low angle
(START/STOP button on the LCD panel)








Low angles
(START/STOP button on the grip)
Tips
If you lean close to the viewfinder while [VF/
Panel] is set to [Auto] (p. 84), the eye sensor
may turn off the LCD screen. You can avoid this
by setting [VF/Panel] to [Panel].
Adjusting the White Balance
You can set White Balance (color balance)
for accurate white reproduction according
to the color temperature of the light source.
You can also use this function to adjust
color according to the lens you are using.
Press WHITE BALANCE.



WHITE BALANCE button