Sony NEX-VG30H - Manual (Page 49)


Table of C
on
ten
ts
Sear
ch image
Inde
x
US
To return to automatic adjustment
mode
Press MANUAL once again. appears next
to the values of [IRIS], [Shutter Speed] and
[Gain (ISO)], and highlighting is canceled.
Items you can assign to the MANUAL
[Exposure]
[Gain(ISO)]
[IRIS]
[Shutter Speed]
[AE Shift]
[WB Color Temp.]
[WB B-A]
[WB G-M]
To assign the menu item to the
MANUAL button
 Press and hold MANUAL down for a
few seconds.
The [MANUAL Button] setting screen
appears
 Rotate the MANUAL dial and select the
menu item to be assigned.
 Press MANUAL.
Notes
Manual settings will be retained even if
you change the assigned menu item of the
MANUAL button. However, if IRIS, Shutter
Speed and Gain (ISO) are set to manual when
[AE Shift] is set to [On], [AE Shift] will not be
effective.
Tips
You can also assign menu items to the
MANUAL button by touching (MENU)
 [Camera/Mic]  [ ( Camera
Settings)]  [MANUAL Button].
The camera data (p. 82) that appears on the
LCD screen will differ, depending on the
recording settings of the camcorder. The













settings will be displayed with the following
icons.
: Automatic
: Exposure is set manually.
Advanced manual operation
You can set the brightness of the movies
you want to shoot by using IRIS, Shutter
Speed and Gain (ISO).
The following explanation is an example for
when IRIS is set to manual.
[Exposure] auto ( )
Shooting images are adjusted to the optimal
brightness.
 Press IRIS  to set the mode to
manual ( next to the setting
value disappears).
You can adjust the setting value using
the MANUAL dial when the setting
value is highlighted with no shown
next to it.
 Rotate the MANUAL dial  to set
the aperture value.
The Shutter Speed and gain (ISO)are
adjusted to the ideal brightness
automatically to fit the aperture value.
[Exposure] manual ( )
When using [Exposure], [Spot Meter], etc.,
any of the IRIS, Shutter Speed, and Gain
(ISO) which are currently set to auto ( ) is
switched to manual ( ).
The brightness is adjusted based on the
value set in [Exposure], [Spot Meter], etc.

