Sony HCD-EX5 - Manual (Page 22)

22 GB
Listening to audio from a
connected component
1
Connect the audio cord.
See “Hooking up optional components” on
page 21.
2
Press FUNCTION repeatedly until “PC”,
“MD” or “TAPE” appears.
Start playing the connected component.
To select the desired connected
component
1
Turn on the system.
2
Press FUNCTION repeatedly until “PC”,
“MD” or “TAPE” appears.
3 Press MENU/NO on the remote.
4
Press . or > on the remote
repeatedly to select the desired connected
component.
To listen to Select
Recording on a connected
component
Making a digital recording on
a digital component
1
Connect the digital optical cable.
See “Hooking up optional components” on
page 21.
2
Start recording.
Refer to the operating instructions provided
with connected component.
Making an analog recording
on a component
1
Connect the audio cord.
See “Hooking up optional components” on
page 21.
2
Start recording.
Refer to the operating instructions provided
with connected component.
The connected personal computer PC?
The connected MD deck MD?
The connected tape deck TAPE?
5
Press ENTER/YES on the remote.