Sony DSC-N2 - Manual (Page 109)

109
Tr
o
uble
sh
ooti
n
g
Troubleshooting
The date and time are not displayed.
• (Screen display switch) button is turned off (page 17).
The image appears rough right after playback starts.
• The image may appear rough right after playback starts due to image processing. This is not a
malfunction.
The image does not appear on the screen when a USB connection is made.
• The switch on the cable for multi-use terminal is set to “TV”. Disconnect the cable for multi-
use terminal or set the switch to “CAMERA” (page 84).
The image does not appear on the TV screen.
• Check [Video Out] to see if the video output signal of your camera is set to the color system of
your TV (page 76).
• Check whether the connection is correct (page 78).
• The switch on the cable for multi-use terminal is set to “CAMERA”. Set to “TV” (page 78).
Your camera cannot delete an image.
• Cancel the protection (page 56).
• You are using the “Memory Stick Duo” with the write-protect switch, and the switch is set to
the LOCK position. Set the switch to the recording position (page 122).
You have deleted an image by mistake.
• Once you have deleted an image, you cannot restore it. We recommend that you protect
images (page 55), or use the “Memory Stick Duo” with the write-protect switch and set the
switch to the LOCK position (page 122) to prevent accidental erasure.
The resizing function does not work.
• You cannot resize movies, Multi Burst images, and images in the Album.
You cannot cut a movie.
• The movie is not long enough to cut (shorter than about two seconds).
• Cancel the protection (page 56).
You cannot paint.
• You cannot paint on images in the Album.
• There is not enough free-capacity in media. Delete unnecessary images.
Deleting/Editing images