Sony DSC-N2 - Manual (Page 31)

31
A
d
va
nc
ed oper
at
ions
Selecting the desired camera function
4 Adjust the shutter speed and the aperture value by touching v/V.
When the zoom is set fully to the W side, you can select an aperture, F2.8, F4, or F8.
When the zoom is set fully to the T side, you can select an aperture, F5.4, F8, F16.
You can select a shutter speed from 1/1000 to 30 seconds.
The difference between the manual settings and proper exposure judged by the camera appears as an EV
value (page 31) on the screen. 0EV indicates the value judged as the most suitable by the camera.
5 Shoot the image.
• The flash is set to (Forcedflash) or (No Flash).
• At the following settings, the adjustment changes only the brightness, not the depth of field.
– at F4 and F8 when the zoom is set fully to the W side
– at F8 and F16 when the zoom is set fully to the T side
• Shutter speeds of one second or longer are indicated by [”], for example, 1”.
• When you set the shutter speed slower, using a tripod is recommended to prevent the effects of vibration.
• When the shutter speed drops below a certain speed in low light conditions, the NR slow shutter function
activates automatically to reduce the picture noise and “NR” appears.
• If you select slow shutter speeds, it takes time to process the data.
1 Press (on-screen key).
2 Set (Camera) to a setting other than [Auto] and [Manual], then touch .
3 Touch (EV).
4 Select a value by touching v/V.
(EV): Adjusting the exposure manually
Aperture value
Shutter speed
Toward +: Brightens an
image.
0EV: The exposure is
determined automatically by
the camera.
Toward –: Darkens an
image.
Toward – Toward +