Sony DSC-N2 - Manual (Page 74)

74
For details on the operation 1 page 62 Setup 2
2
The default settings are marked with .
Selects the brightness of the LCD backlight when using the camera with battery pack.
• You can change the setting by pressing (Screen display switch) button longer.
• Selecting [Bright] uses up the battery pack charge faster.
Selects the sound produced when you operate the camera.
Selects the language to be used to display the menu items, warnings, and messages.
Initializes the setting to the default setting.
The message “Initialize all settings Ready?” appears.
• Make sure that the power is not disconnected during resetting.
• The data in the internal memory or Album are retained even after resetting.
LCD Backlight
Bright Brightens.
Normal
Beep
Shutter Turns on the shutter sound when you press the shutter button.
On Turns on the beep/shutter sound when you press (on-
screen key)/ press the shutter button/ operate the touch panel
buttons.
Off Turns off the beep/shutter sound.
Language
Initialize
OK Resets the settings to the default setting.
Cancel Cancels the resetting.