Sony DSC-N2 - Manual (Page 115)

115
Tr
o
uble
sh
ooti
n
g
Troubleshooting
Cannot insert the date or print images in the index mode.
• The printer does not provide these functions. Consult the printer manufacturer as to whether
the printer provides these functions or not.
• The date may not be inserted in the index mode depending on the printer. Consult the printer
manufacturer.
“---- -- --” is printed on the date-inserted part of the image.
• Images that do not have the recording data cannot be printed with the date inserted. Set [Date]
to [Off] and print the image again (page 101).
Cannot select the print size.
• Consult the printer manufacturer as to whether the printer can provide the desired size.
Cannot print the image at the size selected.
• Disconnect the cable for multi-use terminal and reconnect it whenever you change the paper
size after the printer has been connected to the camera.
• The print setting of the camera differs from that of the printer. Change the setting of either the
camera (page 101) or the printer.
Cannot operate the camera after canceling printing.
• Wait for a while as the printer is carrying out the cancellation. It may take some time
depending on the printer.
The touch panel buttons do not appear.
• Press (on-screen key).
Cannot operate the touch panel buttons correctly or fully.
• Perform [Calibration] (page 77).
The paint pen operation reacts at inappropriate points.
• Perform [Calibration] (page 77).
Buttons do not work as they should.
• [Housing] is set to [On] (page 77).
Touch panel