Sony CPF-IX001 - Manual (Page 20)

20 GB
When the CPF-IX001 is connected to your
computer after installing the M-crew Server
Ver. 2.0 software, the CPF-IX001 is registered
automatically on your computer.
Register the CPF-IX001 on your computer
manually for higher security.
1
Select “REGISTER?” in the network
menu (page 18), then press ENTER.
The count down display appears in the
display of the CPF-IX001.
2
Click [Start] – [All programs] – [M-crew
Server] – [TOOLS] – [EQUIPMENT
LIST] in that order to display the screen
on the M-crew Server Ver. 2.0.
For details, see the “M-crew Server Ver.
2.0” Install Manual included on the
supplied CD-ROM.
3
During displaying the count down
display, set “Equipment selection
mode” to “Manual”, and then click
[Add] on your computer.
The registration starts.
“Complete!” appears in the display of the
CPF-IX001 when the registration is
completed.
Notes
• When the registration is incomplete, “Incomplete!”
appears in the display of the CPF-IX001.
• Step 3 must be performed within 5 minutes after
performing step 1.
1
Select “NET INFO?” in the network
menu (page 18), then press ENTER.
2
Press . or > repeatedly to select
the item that you want to check, then
press ENTER.
Each time you press ENTER, the display
changes cyclically as follows:
NET TYPE?
t AUTO* t
IP ADDRESS? t IP address* t
SUBNET MASK? t Subnet mask* t
GATEWAY? t Default Gateway* t
MAC ADDRESS? t MAC address t
SERVER NAME? t Connected server*
t MY NAME? t Name assigned by
M-crew Server Ver. 2.0*
* The display may differ depending on the
settings.
Registering the CPF-IX001
on your computer
manually Checking network
settings