Sony CPF-IX001 - Manual (Page 7)

Ge
tting Star
te
d
7 GB
To enjoy listening to the music stored on your
computer or listening to the web radio, you must
first install the supplied M-crew Server Ver. 2.0
software.
The installation screen starts up automatically
when you insert the supplied CD-ROM into the
computer, so follow the instructions on the
screen and install the software.
For details on the installation, refer to the
“M-crew Server Ver. 2.0” Install manual
contained on the supplied CD-ROM.
Note for NAS-CZ1 users
Install M-crew Server Ver. 2.0 without uninstalling
M-crew Server Ver. 1.0. The contents information can
be used even after installing M-crew Server Ver. 2.0.
Pull out the insulating sheet to allow power
to flow from the battery.
The remote already contains a battery.
Replacing the battery in the
remote
1
Slide out and remove the battery case.
2
Insert a new lithium battery CR2025 with the
+ side facing up.
3
Slide the battery case back in.
Note
If you do not use the remote for a long period of time,
remove the battery to avoid possible damage from
battery leakage and corrosion.
2: Installing the supplied
M-crew Server Ver. 2.0
software
M-crew Server
Ver. 2.0 software
CD-ROM
3: Preparing the remote
A lithium battery CR2025
continued