Sony MSAC-US30 - Manual (Page 92)

31-GB
How to Use (When using Macintosh)
You can use the driver provided as a standard feature of the OS.
Operate as described in the following.
You can use this unit without installing the driver by
connecting this unit to your computer.
1
Turn on your computer.
2
Insert “Memory Stick” to this unit and connect the USB jack on
this unit with a USB jack on the computer main unit using the
special USB cable supplied.
See page 23 for how to connect this unit and your computer.
3
Driver installation starts automatically and the driver is
installed on the computer.
4
When driver installation is completed, a drive icon of this unit
appears on the desktop and this unit can now be used.
P Note
The drive icon of this unit is not displayed on the desktop when “Memory
Stick” is not inserted to this unit.
Removing this unit from your computer or removing
“Memory Stick” from this unit.
1
Close the software used by this unit.
2
Confirm that the access lamp is off.
3
Drag the drive icon of this unit to the Trash icon.
Alternatively, place the drive icon of this unit in the selected state and
select “Eject” from the “Special” menu in the upper left of the screen.
4
Remove this unit from your computer or remove “Memory
Stick” from this unit.
P Notes
• Do not remove the “Memory Stick” from this unit while the access lamp is
blinking. Data on the ”Memory Stick” could be corrupted.
• Removing this unit or the “Memory Stick” in this unit without performing the
operations above may cause damage to the “Memory Stick.” Sony will not be
liable for any damage caused as a result of not following the instructions
above.